Ing. Monika Vilémová, Ph.D. [ Scientific Worker, Department of Materials Engineering ]

Place: SHB, Office: A 111
Tel.: (+420) 266 052932
Email: vilemova@ipp.cas.cz

Research Interests

Tungsten and tungsten alloys, thermal properties of the alloys
High entropy alloys
Mechanical alloying and powder processing
Characterization of thermally sprayed coatings
Adhesive and cohesive properties of thermally sprayed coatings

Supervised students

2022 - now	Bc. Viktor Benhart Preparation of Master thesis Unconventional methods of W-Cr alloy production
2023 - now	Bc. Rudolf Čtvrtečka Preparation of Bc. diploma work Oxidation resistance of complex refractory alloys
od2022	Viktor Benhart Vedoucí výzkumného úkolu Unconventional methods of W-Cr alloys processing/preparing/producing
2020-now	Matěj Nižňanský Ph.D. thesis supervisor High pressure SPS
2017-now	Jakub Veverka Ph.D. thesis supervisor Thermal stability of tungsten alloys
2012-2013	Dana Tonarová Bachelor thesis supervisor Characterisation of porosity in materials
2014-2015	Dana Tonarová Master thesis supervisor Modification of tungsten by mechanical alloying
2009-2010	Michal Kazda Master thesis supervisor

Research projects

2023-2028	Center of Advanced Nuclear Technology II Co-investigator Provider: Technological Agency of the Czech Republic; Project ID: TN02000012
2020-2025	NeGeTun - New Generation of Tungsten Components for High Heat Loads in Fusion Devices Co-investigator Provider: Technological Agency of the Czech Republic; Project ID: TK03030045
2022-2024	Refractory complex concentrated alloys: high throughput mapping of a compositional space Co-investigator Provider: Czech Science Foundation; Project ID: GA22-24563S
2021-2024	Advanced coating substrate preparation by shifted and ultrafast laser texturing Co-investigator Provider: Technological Agency of the Czech Republic; Project ID: *TH75020001
2020-2022	Tailoring thermal stability of W-Cr based alloys for fusion application Principal investigator Provider: Czech Science Foundation; Project ID: GA20-18392S
2019-2021	High temperature preparation of advanced refractory materials by inductively coupled plasma in controlled atmosphere Co-investigator Provider: Czech Science Foundation; Project ID: GA19-14339S
2018-2020	Feasibility study of self-passivating tungsten alloys preparation by RF plasma spraying Co-investigator Provider: Euratom; Project ID: MAT-3.1.1-T005
2017-2019	Stability of the interfaces in advanced tungsten materials for high temperature environments Co-investigator Provider: Czech Science Foundation; Project ID: GA17-23154S
2017-2019	Influence of defects on properties of bio-compatible high entropy alloys Co-investigator Provider: Czech Science Foundation; Project ID: GA17-17016S
2017-2019	Dispersion strengthened high entropy alloys for extreme conditions Co-investigator Provider: Czech Science Foundation; Project ID: GA17-23964S
2017-2019	Mobility project between the Czech and Chinese Academies of Sciences on plasma-material interactions in fusion devices Co-investigator Provider: Czech Academy of Sciences; Project ID: CAS-17-14
2014-2018	Multidisciplinary research centre for advanced materials Co-investigator Provider: Czech Science Foundation; Project ID: GB14-36566G
2017-2018	Benchmarking of tungsten steel joints for the plasma facing wall of DEMO Co-investigator Provider: Euratom; Project ID: AWP17-ENR-FZJ-01
2014-2016	Interaction of hydrogen isotopes with candidate fusion materials Co-investigator Provider: Czech Science Foundation; Project ID: GA14-12837S
2014-2014	Optimization and characterization of tungsten steel joints for the plasma facing wall using different coating technologies including FGM techniques Co-investigator Provider: Euratom; Project ID: WP14-ER-01/FZJ-10
2012-2013	Development of W/Fe functionally graded materials Co-investigator Provider: Euratom under European Fusion Development Agreement; Project ID: WP12-MAT-HHFM
2013-2013	Investigation of mixed materials surface changes after interaction with laser pulses and plasma streams Co-investigator Provider: Euratom under European Fusion Development Agreement; Project ID: WP13-IPH-A01-P3-01
2007-2011	Evolution of structure and mechanical properties of plasma sprayed materials under various loading Co-investigator Provider: Ministry of Education, Youth and Sports of the Czech Republic; Project ID: ME 901

List of Publications


2023	Ganesh V., Dorow-Gerspach D., Bram M., Linsmeier Ch., Matějíček J., Vilémová M.: High Heat Flux Testing of Graded W-Steel Joining Concepts for the First Wall. Energies 16 [9] (2023) č. článku 3664. E. [ Abstract ] [ Link ]
	Veverka J., Vilémová M., Lukáč F., Kądzielawa A. P., Legut D., Vontorová J., Kozlík J., Chráska T.: Decreasing the W-Cr solid solution decomposition rate: Theory, modelling and experimental verification. Journal of Nuclear Materials 576 [May] (2023) č. článku 154288. [ Abstract ] [ Link ]
	Macková A., Havránek V., Mikšová R., Fernandes S., Matějíček J., Hadraba H., Vilémová M., Liedke M. O., Martan J., Vronka M., Haušild P., Butterling M., Honnerová P., Attalah A. G., Wagner A., Lukáč F.: Radiation damage evolution in High Entropy Alloys (HEAs) caused by 3–5 MeV Au and 5 MeV Cu ions in a broad range of dpa in connection to mechanical properties and internal morphology. Nuclear Materials and Energy 37 [DEC] (2023) č. článku 101510. E. [ Abstract ] [ Link ]
	Nižňanský M., Vanmeensel K., Vleugels J., Tyrpekl V., Vilémová M.: Review on high-pressure spark plasma sintering and simulation of the impact of die/punch material combinations on the sample temperature homogeneity. Open Ceramics 16 [December] (2023) č. článku 100433. E. [ Abstract ] [ Link ]
	Dorow-Gerspach D., Bram M., Ganesh V., Matějíček J., Pintsuk G., Vilémová M., Wirtz M., Linsmeier Ch.: Benchmarking by high heat flux testing of W-steel joining technologies. Nuclear Materials and Energy 37 [December] (2023) č. článku 101508. E. [ Abstract ] [ Link ]
2022	Wangle T., Vilémová M., Tyrpekl V.: Metody slinování za asistence elektrického pole/proudu. Chemické listy 116 [6] (2022) 343-347. [ EN ] [ Abstract ] [ Link ]
	Biesuz M., Bortolotti M., Tessarolo F., Canteri R., Giopato P., Nollo G., Chiappini A., Vilémová M., Sglavo V. M., Soraru G. D.: Solid-state field-assisted ion exchange of Ag in lithium aluminum silicate glass-ceramics: A superfast processing route toward stronger materials with antimicrobial properties. Journal of the European Ceramic Society 42 [4] (2022) 1750-1761. [ Abstract ] [ Link ]
2021	Dubinko A., Yin C., Terentyev D., Zinovev E. V., Rieth M., Antusch S., Vilémová M., Matějíček J., Zhang T.: Plastic deformation in advanced tungsten-based alloys for fusion applications studied by mechanical testing and TEM. International Journal of Refractory Metals & Hard Materials 95 [February] (2021) č. článku 105409. [ Abstract ] [ Link ]
	Macková A., Fernandes S., Matějíček J., Vilémová M., Holý V., Liedke M. O., Martan J., Vronka M., Potoček M., Bábor P., Butterling M., Attallah A. G., Hirschmann E., Wagner A., Havránek V.: Radiation damage evolution in pure W and W-Cr-Hf alloy caused by 5 MeV Au ions in a broad range of dpa. Nuclear Materials and Energy 29 [DEC] (2021) 1-15, č. článku 101085.. [ Abstract ] [ Link ]
	Ganesh V., Dorow-Gerspach D., Heuer S., Matějíček J., Vilémová M., Bram M., Coenen J.W., Wirtz M., Pintsuk G., Theisen W., Linsmeier Ch.: Manufacturing of W-steel joint using plasma sprayed graded W/steel-interlayer with current assisted diffusion bonding. Fusion Engineering and Design 172 [November] (2021) č. článku 112896. [ Abstract ] [ Link ]
	Veverka J., Lukáč F., Kądzielawa A. P., Koller M., Chlup Z., Hadraba H., Karlík M., Legut D., Vontorová J., Chráska T., Vilémová M.: Ultrafine-grained W-Cr composite prepared by controlled W-Cr solid solution decomposition. Materials Letters 304 [December] (2021) č. článku 130728. [ Abstract ] [ Link ]
	Chang C. C., Terentyev D., Zinovev E. V., Van Renterghem L., Yin C., Verleysen P., Pardoen T., Vilémová M., Matějíček J.: Irradiation-induced hardening in fusion relevant tungsten grades with different initial microstructures. Physica Scripta 96 [12] (2021) č. článku 124021. [ Abstract ] [ Link ]
	Matějíček J., Kavka T., Mušálek R., Ctibor P., Medřický J., Vilémová M., Nevrlá B., Degot S., Denoirjean A.: Tungsten-steel composites and FGMs prepared by argon-shrouded plasma spraying. Surface and Coatings Technology 406 [January] (2021) č. článku 126746. [ Abstract ] [ Link ]
	Lukáč F., Vilémová M., Klementová M., Minárik P., Chráska T.: The origin and the effect of the fcc phase in sintered HfNbTaTiZr. Materials Letters 286 [March] (2021) č. článku 129224. [ Abstract ] [ Link ]
	Biesuz M., Saunders T. G., Veverka J., Bortolotti M., Vontorová J., Vilémová M., Reece M. J.: Solidification microstructures of multielement carbides in the high entropy Zr-Nb-Hf-Ta-Cinfx/inf system produced by arc melting. Scripta Materialia 203 [October] (2021) č. článku 114091. [ Abstract ] [ Link ]
	Dong J., Pouchlý V., Biesuz M., Tyrpekl V., Vilémová M., Kermani M., Reece M., Hu C., Grasso S.: Thermally-insulated ultra-fast high temperature sintering (UHS) of zirconia: A master sintering curve analysis. Scripta Materialia 203 [October] (2021) č. článku 114076. [ Abstract ] [ Link ]
	Biesuz M., Galotta A., Motta A., Kermani M., Grasso S., Vontorová J., Tyrpekl V., Vilémová M., Sglavo V. M.: Speedy bioceramics: Rapid densification of tricalcium phosphate by ultrafast high-temperature sintering. Materials Science & Engineering C 127 [August] (2021) č. článku 112246. [ Abstract ] [ Link ]
	Deng H., Biesuz M., Vilémová M., Kermani M., Veverka J., Tyrpekl V., Hu C., Grasso S.: Ultrahigh temperature flash sintering of binder-less tungsten carbide within 6 s. Materials 14 [24] (2021) č. článku 7655. E. [ Abstract ] [ Link ]
	Šolcová P., Nižňanský M., Schulz J., Brázda P., Ecorchard P., Vilémová M., Tyrpekl V.: Preparation of High-Entropy (Ti, Zr, Hf, Ta, Nb) Carbide Powder via Solution Chemistry. Inorganic Chemistry 60 [11] (2021) 7617-7621. [ Abstract ] [ Link ]
	Biesuz M., Ometto L., Tyrpekl V., Vilémová M., Sglavo V. M.: On the power density at the onset for flash sintering in ceramic composites. Scripta Materialia 201 [August] (2021) č. článku 113984. [ Abstract ] [ Link ]
	Veverka J., Vilémová M., Chlup Z., Hadraba H., Lukáč F., Csáki Š., Matějíček J., Vontorová J., Chráska T.: Evolution of carbon and oxygen concentration in tungsten prepared by field assisted sintering and its effect on ductility. International Journal of Refractory Metals & Hard Materials 97 [June] (2021) č. článku 105499. [ Abstract ] [ Link ]
2020	Vilémová M., Hadraba H., Weiss Z., Lukáč F., Csáki Š., Chlup Z., Matějíček J., Chráska T.: Phase, composition and structure changes of CoCrNi-based concentrated alloys resulting from high temperature oxidation. Materials 13 [10] (2020) č. článku 2276. [ Abstract ] [ Link ]
	Matějíček J., Klečka J., Čížek J., Veverka J., Vilémová M., Chráska T., Ganesh V.: Tungsten-steel and tungsten-chromium composites prepared by RF plasma spraying. Proceedings 29th International Conference on Metallurgy and Materials. Ostrava: Tanger, 2020, s. 756-763. ISBN 978-80-87294-97-0. [ Abstract ] [ Link ] [29th International Conference on Metallurgy and Materials. Brno (CZ), 20.05.2020-22.05.2020]
	Matějíček J., Veverka J., Yin C., Vilémová M., Terentyev D., Wirtz M., Gago M., Dubinko A., Hadraba H.: Spark plasma sintered tungsten – mechanical properties, irradiation effects and thermal shock performance. Journal of Nuclear Materials 542 [December] (2020) č. článku 152518. [ Abstract ] [ Link ]
	Entler S., Ďuran I., Kovařík K., Sládek P., Grover O., Vilémová M., Najman D., Kohout M., Šebek J., Výborný K., Šobáň Z.: Temperature dependence of the Hall coefficient of sensitive layer materials considered for DEMO Hall sensors. Fusion Engineering and Design 153 [April] (2020) č. článku 111454. [ Abstract ] [ Link ] [14th International Symposium on Fusion Nuclear Technology. Budapešť, 22.09.2019-27.09.2019]
	Koller M., Vilémová M., Lukáč F., Beran P., Čížek B., Hadraba H., Matějíček J., Veverka J., Seiner H.: An ultrasonic study of relaxation processes in pure and mechanically alloyed tungsten. International Journal of Refractory Metals & Hard Materials 90 [August] (2020) č. článku 105233. [ Abstract ] [ Link ]
	Heuer S., Coenen J.W., Pintsuk G., Matějíček J., Vilémová M., Linsmeier Ch.: Overview of challenges and developments in joining tungsten and steel for future fusion reactors. Physica Scripta 2020 [January] (2020) č. článku 014028. [ Abstract ] [ Link ]
	Terentyev D., Vilémová M., Yin C., Veverka J., Dubinko A., Matějíček J.: Assessment of mechanical properties of SPS-produced tungsten including effect of neutron irradiation. International Journal of Refractory Metals & Hard Materials 89 (2020) č. článku 105207. [ Abstract ] [ Link ]
2019	Lukáč F., Mušálek R., Vilémová M., Čízek J., Kuriplach J., Stráská J., Zyka J., Málek J.: Defects in the high entropy alloy HfNbTaTiZr prepared by spark plasma sintering. AIP Conference Proceedings. College Park: American Institute of Physics Inc., 2019 - (Kaduchova, K.; Carnogurska, M.; Lenhard, R.; Brestovic, T.), Roč. 2182 (2019), č. článku 050013. 2118. ISBN 978-073541858-5. ISSN 0094-243X. [ Abstract ] [ Link ] [18th International Conference on Positron Annihilation: Positron Annihilation Spectroscopy-Fundamentals, Techniques and Applications (ICPA-18). Orlando (US), 19.08.2018-24.08.2018]
	Heuer S., Matějíček J., Vilémová M., Koller M., Illková K., Veverka J., Weber T., Pintsuk G., Coenen J.W., Linsmeier Ch.: Atmospheric plasma spraying of functionally graded steel/tungsten layers for the first wall of future fusion reactors. Surface and Coatings Technology 366 [25 May 2019] (2019) 170-178. [ Abstract ] [ Link ]
	Matějíček J., Vilémová M., Veverka J., Kubásek J., Lukáč F., Novák P., Preisler D., Stráský J., Weiss Z.: On the Structural and Chemical Homogeneity of Spark Plasma Sintered Tungsten. Metals 9 [8] (2019) č. článku 879. [ Abstract ] [ Link ]
	Matějíček J., Vilémová M., Moskal D., Mušálek R., Krofta J., Janata M., Kutílek Z., Klečka J., Heuer S., Martan J., Nardozza E., Houdková Š., Dorow-Gerspach D.: The Role of Laser Texturing in Improving the Adhesion of Plasma Sprayed Tungsten Coatings. Journal of Thermal Spray Technology 28 [7] (2019) 1346-1362. [ Abstract ] [ Link ]
	Chlup Z., Fintová S., Hadraba H., Kuběna I., Vilémová M., Matějíček J.: Fatigue Behaviour and Crack Initiation in CoCrFeNiMn High-Entropy Alloy Processed by Powder Metallurgy. Metals 9 [10] (2019) č. článku 1110. [ Abstract ] [ Link ]
	Velpula Praveen K., Ďurák M., Kramer D., Meadows A.R., Vilémová M., Rus B.: Evolution of femtosecond laser damage in a hafnia-silica multi-layer dielectric coating. Optics Letters 44 [21] (2019) 5342-5345. [ Abstract ] [ Link ]
	Čížek J., Vilémová M., Lukáč F., Koller M., Kondás J., Singh R.: Cold Sprayed Tungsten Armor for Tokamak First Wall. Coatings 9 [12] (2019) č. článku 836. [ Abstract ] [ Link ]
	Málek J., Zýka J., Lukáč F., Vilémová M., Vlasák T., Čížek J., Melikhova O., Macháčková A., Kim H.S.: The effect of processing route on properties of HfNbTaTiZr high entropy alloy. Materials 12 [23] (2019) č. článku 4022. [ Abstract ] [ Link ]
	Vilémová M., Lukáč F., Veverka J., Illková K., Matějíček J.: Controlling the carbide formation and chromium depletion in W-Cr alloy during field assisted sintering. International Journal of Refractory Metals & Hard Materials 79 (2019) 217-223. [ Abstract ] [ Link ]
	Vilémová M., Illková K., Csáki Š., Lukáč F., Hadraba H., Matějíček J., Chlup Z., Klečka J.: Thermal and Oxidation Behavior of CoCrFeMnNi Alloy with and Without Yttrium Oxide Particle Dispersion. Journal of Materials Engineering and Performance 28 [9] (2019) 5850-5859. [ Abstract ] [ Link ]
	Čížek J., Klečka J., Vilémová M., Matějíček J., Veverka J., Mušálek R., Lukáč F., Kondás J., Zlatník R.: Armor W-Cr coatings for plasma-facing components in tokamaks by cold spray and RF-ICP. Proceedings of the International Thermal Spray Conference. 2019, s. 535-540. ISBN 9781510888005. [ Abstract ] [International Thermal Spray Conference and Exposition: New Waves of Thermal Spray Technology for Sustainable Growth. Yokohama (JP), 26.05.2019-29.05.2019]
2018	Vilémová M., Illková K., Lukáč F., Matějíček J., Klečka J., Leitner J.: Microstructure and phase stability of W-Cr alloy prepared by spark plasma sintering. Fusion Engineering and Design 127 [February] (2018) 173-178. [ Abstract ] [ Link ]
	Yin C., Terentyev D., Pardoen T., Bakaeva A., Petrov R., Antusch S., Rieth M., Vilémová M., Matějíček J., Zhang T.: Tensile properties of baseline and advanced tungsten grades for fusion applications. International Journal of Refractory Metals & Hard Materials 75 [September] (2018) 153-162. [ Abstract ] [ Link ]
	Dobeš F., Hadraba H., Chlup Z., Dlouhý A., Vilémová M., Matějíček J.: Compressive creep behavior of an oxide-dispersion-strengthened CoCrFeMnNi high-entropy alloy. Materials Science and Engineering A-Structural materials 732 [AUG] (2018) 99-104. [ Abstract ] [ Link ]
	Štraus J., Koláček K., Schmidt J., Frolov O., Vilémová M., Matějíček J., Jäger A., Juha L., Toufarová M., Choukorov A., Kasuya K.: Response of fusion plasma-facing materials to nanosecond pulses of extreme ultraviolet radiation. Laser and Particle Beams 36 [3] (2018) 293-307. [ Abstract ] [ Link ]
	Tanure L., Bakaeva A., Lapeire L., Terentyev D., Vilémová M., Matějíček J., Verbeken K.: Nano-hardness, EBSD analysis and mechanical behavior of ultra-fine grain tungsten for fusion applications as plasma facing material. Surface and Coatings Technology 355 (2018) 252-258. [ Abstract ] [ Link ] [International Conference on Surface Modification of Materials by Ion Beams. Lisbon, 09.07.2017-14.07.2017]
2017	Illková K., Vilémová M., Lukáč F.: FÁZOVÁ STABILITA Y2O3 A W-Y2O3 ZPRACOVANÝCH METODOU MECHANICKÉHO LEGOVÁNÍ. 39. Mezinárodní český a slovenský kalorimetrický seminář, Sborník příspěvků. Pardubice: Univerzita Pardubice, 2017, s. 69-72. ISBN 978-80-7560-060-8. [ EN ] [ Abstract ] [Mezinárodní český a slovenský kalorimetrický seminář/39./. Kouty u Ledče nad Sázavou (CZ), 22.05.2017-26.05.2017]
	Matějíček J., Weinzettl V., Vilémová M., Morgan T.W., De Temmerman G., Dimitrova M., Cavalier J., Adámek J., Seidl J., Jäger A.: ELM-induced arcing on tungsten fuzz in the COMPASS divertor region. Journal of Nuclear Materials 492 [August] (2017) 204-212. [ Abstract ] [ Link ] [International Conference on Plasma Surface Interactions in Controlled Fusion Devices, PSI 2016/22./. Roma, 30.05.2016-03.06.2016]
	Lukáč F., Vilémová M., Nevrlá B., Klečka J., Chráska T., Molnárová O.: Properties of Mechanically Alloyed W-Ti Materials with Dual Phase Particle Dispersion. Metals 7 [1] (2017) č. článku 3. [ Abstract ] [ Link ]
	Kolegar T., Matoušek M., Vilémová M., Starý V.: ADHESION OF BIOCOMPATIBLE TiNb COATING. Acta Polytechnica CTU Proceedings. Vol. 8. Praha: Czech Technical University in Prague, 2017 - (Tolde, Z.), s. 5-7. CTU Proceedings, 8. ISBN 978-80-01-06135-0. E-ISSN 2336-5382. [ Abstract ] [ Link ] [Biomaterials and surfaces 2016. Herbertov (CZ), 20.09.2016-23.09.2016]
	Matějíček J., Vilémová M., Nevrlá B., Kocmanová L., Veverka J., Halasová M., Hadraba H.: The influence of substrate temperature and spraying distance on the properties of plasma sprayed tungsten and steel coatings deposited in a shrouding chamber. Surface and Coatings Technology 318 [May] (2017) 217-223. [ Abstract ] [ Link ] [International Meeting on Thermal Spraying (RIPT)/7./. Limoges, 09.12.2015-11.12.2015]
	Hadraba H., Chlup Z., Dlouhý A., Dobeš F., Roupcová P., Vilémová M., Matějíček J.: Oxide dispersion strengthened CoCrFeNiMn high-entropy alloy. Materials Science and Engineering A-Structural materials 689 [MAR] (2017) 252-256. [ Abstract ] [ Link ]
	Klečka J., Mušálek R., Vilémová M., Lukáč F.: On tungsten spraying using inductively coupled plasma system - First results. METAL 2017: 26th International Conference on Metallurgy and Materials: abstracts. Ostrava: Tanger Ltd., 2017, s. 1321-1326. ISBN 978-80-87294-73-4. [ Abstract ] [26th International Conference on Metallurgy and Materials. Brno (CZ), 24.05.2017-26.05.2017]
2016	Matějíček J., Vilémová M., Hadraba H., Di Gabriele F., Kuběna I., Kolíbalová E., Michalička J., Čech J., Jäger A.: Behavior of W-based materials in hot helium gas. Nuclear Materials and Energy 9 [December] (2016) 405-410. [ Abstract ] [ Link ] [International Conference of Fusion Reactor Material (ICFRM-17) /17./. Aachen, 11.10.2015-16.10.2015]
	Vilémová M., Pala Z., Jäger A., Matějíček J., Chernyshova M., Kowalska-Strzeciwilk E., Gribkov V. A., Janata M.: Behavior and microstructural changes in different tungsten-based materials under pulsed plasma loading. Nuclear Materials and Energy 9 [December] (2016) 123-127. [ Abstract ] [ Link ] [International Conference of Fusion Reactor Material (ICFRM-17) /17./. Aachen, 11.10.2015-16.10.2015]
	Vilémová M., Nevrlá B., Pala Z., Kocmanová L., Janata M., Matějíček J., Tonarová D.: Properties of Ultrafine-Grained Tungsten Prepared by Ball Milling and Spark Plasma Sintering. Applied Mechanics and Materials. Vol. 821. Zürich: Trans Tech Publications Inc, 2016 - (Fischer, C.), s. 399-404. (Engineering Mechanics. 821). ISBN 978-3-03835-700-1. ISSN 1660-9336. [ Abstract ] [ Link ] [Engineering Mechanics 2015, International conference engineering mechanics 2015/21./. Svratka (CZ), 11.05.2015-14.05.2015]
	Chernyshova M., Gribkov V. A., Kowalska-Strzeciwilk E., Kubkowska M., Miklaszewski R., Paduch M., Pisarczyk T., Zielinska E., Demina E.V., Pimenov V. N., Maslyaev S. A., Bondarenko G.G., Vilémová M., Matějíček J.: Interaction of powerful hot plasma and fast ion streams with materials in dense plasma focus devices. Fusion Engineering and Design 113 [December] (2016) 109-118. [ Abstract ] [ Link ]
	Vilémová M., Pala Z., Jäger A., Matějíček J., Chernyshova M., Kowalska-Strzęciwilk E., Tonarová D., Gribkov V. A.: Evaluation of surface, microstructure and phase modifications on various tungsten grades induced by pulsed plasma loading. Physica Scripta 91 [3] (2016) 034003. [ Abstract ] [ Link ] [PLASMA 2015 : International Conference on Research and Applications of Plasmas. Warsaw, 07.09.2015-11.09.2015]
	Ganvir A., Curry N., Markocsan N., Nylen P., Joshi S., Vilémová M., Pala Z.: Influence of Microstructure on Thermal Properties of Axial Suspension Plasma-Sprayed YSZ Thermal Barrier Coatings. Journal of Thermal Spray Technology 25 [1-2] (2016) 202-212. [ Abstract ] [ Link ] [ITSC 2015: International Thermal Spray Conference and Exposition. Long Beach, California, 11.05.2015-14.05.2015]
	Brožek V., Březina V., Brom P., Kubatík T., Vilémová M., Mastný L., Novák M.: Black Chromia Plating for the Solar Radiation Absorbers. Proceedings of the 4th International Conference on Chemical Technology. Prague: Czech Society of Industrial Chemistry, 2016 - (Veselý, M.; Hrdlička, Z.; Hanika, J.; Lubojacký, J.), s. 253-258. ICCT. ISBN 978-80-86238-94-4. ISSN 2336-811X. [ Abstract ] [ Link ] [International Conference on Chemical Technology, ICCT2016 /4./. Mikulov (CZ), 25.04.2016-27.04.2016]
	Brožek V., Mastný L., Novák M., Vilémová M., Kubatík T.: Black Chromia Coatings on Metal Tubes for the Solar Collectors. METAL 2016 – Conference proceedings: 25th Anniversary International Conference on Metallurgy and Materials. Ostrava: TANGER Ltd., Ostrava, 2016, s. 1025-1030. METAL. ISBN 978-80-87294-67-3. [ Abstract ] [ Link ] [METAL 2016 - 25th Anniversary International Conference on Metallurgy and Materials/25./. Brno (CZ), 25.05.2016-27.05.2016]
2015	Berka J., Vilémová M., Sajdl P.: Testing of degradation of alloy 800 H in impure helium at 760 °C. Journal of Nuclear Materials 464 [September] (2015) 221-229. [ Abstract ] [ Link ]
	Chráska T., Pala Z., Mušálek R., Medřický J., Vilémová M.: Post-treatment of Plasma-Sprayed Amorphous Ceramic Coatings by Spark Plasma Sintering. Journal of Thermal Spray Technology 24 [4] (2015) 637-643. [ Abstract ] [ Link ]
	Matějíček J., Nevrlá B., Vilémová M., Boldyryeva H.: Overview of processing technologies for tungsten-steel composites and FGMs for fusion applications. Nukleonika 60 [2] (2015) 267-273. [ Abstract ] [ Link ] [Kudowa Summer School „Towards Fusion Energy“. Kudowa Zdrój, 09.06.2014-13.06.2014]
	Medřický J., Curry N., Pala Z., Vilémová M., Chráska T., Johansson J., Markocsan N.: Optimization of High Porosity Thermal Barrier Coatings Generated with a Porosity Former. Journal of Thermal Spray Technology 24 [4] (2015) 622-628. [ Abstract ] [ Link ]
	Vilémová M., Matějíček J., Nevrlá B., Chernyshova M., Gasior P., Kowalska-Strzeciwilk E., Jäger A.: Heat load and deuterium plasma effects on SPS and WSP tungsten. Nukleonika 60 [2] (2015) 275-283. [ Abstract ] [ Link ] [Kudowa Summer School 2014 "Towards Fusion Energy"/12./. Kudowa Zdrój, 09.06.2014-13.06.2014]
	Ctibor P., Nevrlá B., Pala Z., Sedláček J., Soumar J., Kubatík T., Neufuss K., Vilémová M., Medřický J.: Study on the plasma sprayed amorphous diopside and annealed fine-grained crystalline diopside. Ceramics International 41 [9] (2015) 10578-10586. [ Abstract ] [ Link ]
	Ganvir A., Curry N., Markocsan N., Nylen P., Vilémová M., Pala Z.: Influence of Microstructure on Thermal Properties of Columnar Axial Suspension Plasma Sprayed Thermal Barrier Coatings. ITSC 2015: Thermal Spray 2015: Proceedings from the International Thermal Spray Conference. Russell Township : ASM International, 2015 - (McDonald, A.; Agarwal, A.; Bolelli, G.; Concustell, A.; Lau, Y.; Toma, F.; Turunen, E.; Widener, C.), s. 498-505 ISBN 978-1-62708-093-4. - (ASM International). [ Abstract ] [International Thermal Spray Conference and Exposition 2015. Long Beach, California (US), 11.04.2015-14.05.2015]
	Mušálek R., Vilémová M., Matějíček J., Taltavull C., Lopez Galisteo A.J.: In-situ Observation of Ongoing Microstructural Changes in Functionally Graded Thermal Spray Coating during Mechanical Loading. Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. India : Valardocs, 2015 - (Sudarshan, T.; Vuoristo, P.; Koivuluoto, H.), s. 571-578 ISBN 978-81-926196-1-3. [ Abstract ] [ Link ] [International Conference on Surface Modification Technologies/28./. Tampere (FI), 16.06.2014-18.06.2014]
	Aussems D.U.B., Nishijima D., Brandt C., van der Meiden H.J., Vilémová M., Matějíček J., De Temmerman G., Doerner R.P., Lopes Cardozo N.J.: The occurrence and damage of unipolar arcing on fuzzy tungsten. Journal of Nuclear Materials 463 [August] (2015) 303-307. [ Abstract ] [ Link ] [PLASMA-SURFACE INTERACTIONS 21: International Conference on Plasma-Surface Interactions in Controlled Fusion Devices. Kanazawa, 26.05.2014-30.05.2014]
	Kubatík T., Vilémová M., Mušálek R., Janata M.: Mechanical and chemical properties of plasma sprayed bronze CuAl10 coating on magnesium and magnesium alloy AZ91. Proceedings of the 3rd International Conference on Chemical Technology, ICCT 2015. Prague : Czech Society of Industrial Chemistry, 2015 - (Kalenda, P.; Lubojacký, J.), s. 230-234 ISBN 978-80-86238-79-1. - (ICCT). [ Abstract ] [ Link ] [International Conference on Chemical Technology-ICCT2015/3./. Mikulov (CZ), 13.04.2015-15.04.2015]
	Kubatík T., Pala Z., Neufuss K., Vilémová M., Mušálek R., Stoulil J., Slepička P., Chráska T.: Metallurgical bond between magnesium AZ91 alloy and aluminium plasma sprayed coatings. Surface and Coatings Technology 282 [November] (2015) 163-170. [ Abstract ] [ Link ]
	Matějíček J., Nevrlá B., Čech J., Vilémová M., Klevarová V., Haušild P.: Mechanical and Thermal Properties of Individual Phases Formed in Sintered Tungsten-Steel Composites. Acta Physica Polonica. A 128 [4] (2015) 718-721. [ Abstract ] [ Link ] [International Symposium on Physics of Materials /13./. Praha, 31.08.2014-04.09.2014]
2014	Nohava J., Mušálek R., Matějíček J., Vilémová M.: A contribution to understanding the results of instrumented indentation on thermal spray coatings - Case study on Al2O3 and stainless steel. Surface and Coatings Technology 240 [February] (2014) 243-249. [ Abstract ] [ Link ]
	Brožek V., Pala Z., Vilémová M., Kubatík T., Mušálek R., Nevrlá B., Mastný L.: Composites of titanium carbide with scandium matrix. METAL 2014: 23rd International Conference on Metallurgy and Materials, conference proceedings. Ostrava : Tanger Ltd, 2014, E90-E90. ISBN 978-80-87294-52-9. [ Abstract ] [METAL 2014,International Conference on Metallurgy and Materials/23./. Brno (CZ), 21.05.2014-23.05.2014]
	Chráska T., Medřický J., Mušálek R., Vilémová M., Pala Z., Cinert J.: Post-treatment of plasma sprayed amorphous ceramic coatings by spark plasma sintering. ITSC 2014 :Interational Thermal Spray Conference and Exposition, Abstracts (including manuscripts on CD-ROM). Düsseldorf : DVS Media GmbH, 2014, s. 617-622. ISBN 978-3-87155-574-9. - (DVS-Berichte. 302). [ Abstract ] [ Link ] [ITSC 2014 :Interational Thermal Spray Conference and Exposition. Barcelona (ES), 21.05.2014-23.05.2014]
	Brožek V., Kubatík T., Vilémová M., Mušálek R., Mastný L.: Silicon carbide for chemical application prepared by SPS method. Proceedings of the 2nd International Conference on Chemical Technology. Prague : Czech Society of Industrial Chemistry, 2014 - (Kalenda, P.; Lubojacký, J.), s. 129-134 ISBN 978-80-86238-64-7. [ Abstract ] [Mezinárodní chemicko-technologická konference/2./. Mikulov (CZ), 07.04.2014-09.04.2014]
	Vilémová M., Nevrlá B., Matějíček J., Mušálek R.: Influence of Preheating Temperature on the Quality of the Interface between Plasma Sprayed Coatings and Substrate. Key Engineering Materials. Vol. 606. Zurich : Trans Tech Publications Ltd, 2014 - (Haušíld, P.; Materna, A.; Vilémová, M.), s. 183-186 ISSN 1662-9795. - (606). [ Abstract ] [ Link ] [International Conference on Local Mechanical Properties, LMP 2013/10./. Kutná Hora (CZ), 06.11.2013-08.11.2013]
	Ctibor P., Nevrlá B., Pala Z., Sedláček J., Kubatík T., Neufuss K., Vilémová M., Medřický J.: Study on the Plasma Sprayed Diopside. Vrstvy a povlaky 2014. Trenčín : Knihviazačstvo, 2014, s. 23-28. ISBN 978-80-970824-3-7. [ Abstract ] [ Link ] [Vrstvy a povlaky 2014. Rožnov pod Radhoštěm (CZ), 20.10.2014-21.10.2014]
	Kubatík T., Chráska T., Pala Z., Vilémová M., Mušálek R., Kotlan J., Brožek V., Dubský J.: SiC-Ti composites fabricated by pulsed electric current sintering. Proceedings of the Euro PM2014 Congress. Salzburg : European Powder Metallurgy Association, 2014. ISBN 978-1-899072-45-3. [ Abstract ] [ Link ] [Euro powder metallurgy 2014 Congress and Exhibition. Salzburg (AT), 21.09.2014-24.09.2014]
	Medřický J., Vilémová M., Chráska T., Curry N., Markocsan N.: Optimization of High Porosity Thermal Barrier Coatings Generated with a Porosity Former. ITSC 2014 :Interational Thermal Spray Conference and Exposition, Abstracts (including manuscripts on CD-ROM). Düsseldorf : DVS Media GmbH, 2014, s. 680-685. ISBN 978-3-87155-574-9. - (DVS-Berichte. 302). [ Abstract ] [ITSC 2014 :Interational Thermal Spray Conference and Exposition. Barcelona (ES), 21.05.2014-23.05.2014]
	Nevrlá B., Vilémová M., Matějíček J.: THERMAL AND MECHANICAL PROPERTIES OF TUNGSTEN COMPACTS PREPARED BY SPS. Proceedings of XIIIth youth symposium on experimental solid mechanics. Praha : Czech Technical University in Prague, Faculty of Transportation Sciences, 2014 - (Kytýř, D.; Zlámal, P.; Růžička, M.), s. 80-83 ISBN 978-80-01-05556-4. [ Abstract ] [ Link ] [Youth symposium on experimental solid mechanics /13./. Děčín (CZ), 29.06.2014-02.07.2014]
	Curry N., Janikowski W., Pala Z., Vilémová M., Markocsan N.: Impact of impurity content on the sintering resistance and phase stability of dysprosia- and yttria-stabilized zirconia thermal barrier coatings. Journal of Thermal Spray Technology 23 [1-2] (2014) 160-169. [ Abstract ] [ Link ] [International Thermal Spray Conference (ITSC2013). Busan, 13.05.2013-15.05.2013]
2013	Matějíček J., Vilémová M., Mušálek R., Sachr P., Horník J.: The Influence of Interface Characteristics on the Adhesion/Cohesion of Plasma Sprayed Tungsten Coatings. Coatings 3 [2] (2013) 108-125. [ Abstract ] [ Link ]
	Matějíček J., Kavka T., Bertolissi G., Ctibor P., Vilémová M., Mušálek R., Nevrlá B.: The Role of Spraying Parameters and Inert Gas Shrouding in Hybrid Water-Argon Plasma Spraying of Tungsten and Copper for Nuclear Fusion Applications. Journal of Thermal Spray Technology 22 [5] (2013) 744-755. [ Abstract ] [ Link ]
	Mušálek R., Pejchal V., Vilémová M., Matějíček J.: Multiple-Approach Evaluation of WSP Coatings Adhesion/Cohesion Strength. Journal of Thermal Spray Technology 22 [2-3] (2013) 221-232. [ Abstract ] [ Link ] [International Thermal Spray Conference (ITSC). Houston, 21.05.2012-24.05.2012]
	Mastný L., Vilémová M., Brožek V.: Nanočástice zlata připravené metodou LPPS. ChemZi 9 [1] (2013) 176-177. [ EN ] [ Abstract ] [Zjazd chemikov/65./. Tatranské Matliare, 09.09.2013-13.09.2013]
	Mušálek R., Dlabáček Z., Vilémová M., Pala Z., Matějíček J., Chráska T.: Preparation of multiphase materials with spark plasma sintering. METAL 2013 Conference Proceedings: 22nd International Conference on Metallurgy and Materials. Ostrava : Tanger spol. s r.o, 2013, s. 1625-1625. ISBN 978-80-87294-39-0. [ Abstract ] [ Link ] [METAL 2013: International Conference on Metallurgy and Materials/22./. Brno (CZ), 15.05.2013-17.05.2013]
2012	Vilémová M., Matějíček J., Mušálek R., Nohava J.: Application of Structure-Based Models of Mechanical and Thermal Properties on Plasma Sprayed Coatings. Journal of Thermal Spray Technology 21 [3-4] (2012) 372-382. [ Abstract ] [ Link ]
	Mušálek R., Pejchal V., Pala Z., Vilémová M., Matějíček J.: Adhezní/kohezní zkoušení žárových nástřiků při namáhání smykem. Vrstvy a povlaky 2012. Trenčín : LISS a.s, 2012 - (Šošovičková, J.), s. 69-74 ISBN 978-80-970824-1-3. [ EN ] [ Abstract ] [ Link ] [Vrstvy a Povlaky 2012. Rožnov pod Radhoštěm (CZ), 08.10.2012-09.10.2012]
	Vilémová M., Nevrlá B., Matějíček J.: Mechanical and thermal properties of tungsten composite coatings. Vrstvy a povlaky 2012. Trenčín : LISS a.s, 2012 - (Šošovičková, J.), s. 135-140 ISBN 978-80-970824-1-3. [ Abstract ] [ Link ] [Vrstvy a Povlaky 2012. Rožnov pod Radhoštěm (CZ), 08.10.2012-09.10.2012]
	Mušálek R., Vilémová M., Matějíček J., Pejchal V.: Multiple-Approach Evaluation of WSP Coatings Adhesion/Cohesion Strength. Thermal Spray 2012: Proceedings from the International Thermal Spray Conference and Exposition. Materials Park, Ohio : ASM International, 2012 - (Lima, R.; Agarwal, A.; Hyland, M.; Lau, Y.; Li, C.; McDonald, A.; Toma, F.), s. 746-751 ISBN N. - (ASM International). [ Abstract ] [ Link ] [International Thermal Spray Conference 2012 (ITSC 2012). Houston (US), 21.05.2012-24.05.2012]
2011	Mušálek R., Vilémová M., Pejchal V., Matějíček J.: Studie relevantnosti stanovení přilnavosti v tahu pro WSP nástřiky. Vrstvy a povlaky 2011. Trenčín : LISS,a.s, 2011 - (Šošovičková, J.) S. 117-122. ISBN 978-80-970824-0-6. [ EN ] [Vrstvy a Povlaky 2011. Rožnov pod Radhoštěm (CZ), 17.10.2011-18.10.2011]
	Vilémová M., Matějíček J., Mušálek R.: Application of structure-based models of mechanical and thermal properties on plasma sprayed coatings. International Thermal Spray Conference (ITSC 2011). Düsseldorf : DSV-German Welding Society, 2011. S. 635-643. ISBN 978-3-87155-268-7. [International Thermal Spray Conference 2011(ITSC2011). Hamburk (DE), 27.09.2011-29.09.2011]
	Vilémová M., Siegl J., Matějíček J., Mušálek R.: Effect of the grit blasting exposure time on the adhesion of Al2O3 and 316L coatings. International Thermal Spray Conference (ITSC 2011). Düsseldorf : DSV-German Welding Society, 2011. S. 1001-1006. ISBN 978-3-87155-268-7. [International Thermal Spray Conference 2011(ITSC2011).. Hamburg (DE), 27.09.2011-29.09.2011]
2010	Mušálek R., Matějíček J., Vilémová M., Kovářík O.: Non-Linear Mechanical Behavior of Plasma Sprayed Alumina Under Mechanical and Thermal Loading. Journal of Thermal Spray Technology 19 [1-2] (2010) 422-428. [ Abstract ] [ Link ] [International Thermal Spray Conference (ITSC 2009):Expanding Thermal Spray Performance to New Markets and Applications. Las Vegas, NV, 04.05.2009-07.05.2009]
	Mušálek R., Vilémová M., Matějíček J.: Bonded Interface Technique for Failure Analysis of Thermal Spray Coatings. Vrstvy a povlaky 2010. Trenčín : LISS a.s, 2010 - (Šošovičková, J.) S. 63-68. ISBN 978-80-970514-2-6. [ Abstract ] [Vrstvy a povlaky 2010. Rožnov pod Radhoštěm (CZ), 04.10.2010-05.10.2010]
	Vilémová M., Matějíček J., Choi B.: INVESTIGATION OF RESIDUAL STRESS STATE INFLUENCE ON THE MECHANICAL PROPERTIES OF WC-12%Co COATINGS. Vrstvy a povlaky 2010. Trenčín : LISS a.s, 2010 - (Šošovičková, J.) S. 95-100. ISBN 978-80-970514-2-6. [ Abstract ] [Vrstvy a povlaky 2010. Rožnov pod Radhoštěm (CZ), 04.10.2010-05.10.2010]
2009	Mušálek R., Matějíček J., Vilémová M., Kovářík O.: Non-Linear Mechanical Behavior of Plasma Sprayed Coatings under Mechanical and Thermal Loading. Expanding Thermal Spray Performance to New Markets and Applications: Proceedings of the 2009 International Thermal Spray Conference. Materials Park, Ohio, USA : International Thermal Spray Association, 2009 - (Marple, B.; Hyland, M.; Lau, Y.; Li, C.; Lima, R.; Montavon, G.) S. 914-919. ISBN 978-1-61503-004-0. [ Abstract ] [International Thermal Spray Conference ,ITSC 2009. Las Vegas (US), 04.05.2009-07.05.2009]
1960	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
	: .
0000	Mušálek R., Tesař T., Matějíček J., Vilémová M., Klečka J.: Strukturování povrchu laserem s vysokým výkonem jako předpříprava povrchu součásti. pretreatment.] [ EN ] [ Abstract ] Vrstvy a povlaky 2023. Trenčianska Teplá: M-PRESS s.r.o., 2023, s. 61-63. ISBN 978-80-972133-6-7.