doc. Ing. Slavomír Entler, Ph.D. [ Scientific Worker, Tokamak Department ]

Place: Tokamak Building, Office: F 104
Tel.: (+420) 266 053393
Email: entler@ipp.cas.cz

Research Interests

Plasma diagnostics and instrumentation.
Fusion nuclear technology.
High heat fluxes
Energy utilization of nuclear fusion.

Education

2023	Associate Professor in Structural and Process Engineering Department of Energy Engineering, Faculty of Mechanical Engineering, Czech Lawson criterion and its application in the evaluation of fusion reactions for applicability in fusion power plants with magnetic plasma confinement.
2018	Ph.D. in Power Engineering Department of Energy Engineering, Faculty of Mechanical Engineering, Czech Energy utilization of nuclear fusion.
2017	Diagnostics and Technology Developments in view of ITER and DEMO International school of fusion reactors technology ISFRT, Erice, Italy
2012	Authorized Engineer in Electrotechnical equipment The Czech Chamber of Authorized Engineers and Technicians, Prague Building Environment Technology, specializing in Electrical Equipment.
1987	M.Sc.Eng. in Heat transfer Energy Physics Faculty, Moscow Power Engineering Institute, Moscow, Russia Hybrid thermonuclear power plant with the Test thermonuclear reactor.

Research experience

2015 - now	Researcher Institute of Plasma Physics of the Czech Academy of Sciences, Prague Development of radiation and temperature resistant Hall sensors for fusion reactors
2015 - now	Pedagogical worker CTU in Prague, Faculty of Mechanical Engineering/Institute of Power Engineering and Faculty of Nuclear Sciences and Physical Engineering/Department of Physics Courses "Nuclear Fusion" and "Technology of Thermonuclear Facilities"
2013-2015	Senior Researcher Research Centre Rez Ltd, Husinec-Rez Head of the First Wall Technology research activity. Project manager of the high heat flux test facility HELCZA construction. Member of the Project board of WPDIV EUROfusion for the DEMO divertor development.
1997-2013	Head of development, Chief engineer. Profitech Ltd, Prague Development and commissioning of the diagnostic and data acquisition systems. Development of the software for diagnostic and data acquisition systems. CFD thermohydraulic analysis and modelling in the energy sector.
1991-1996	Production manager Newton elektronika Praha, Prague Design, commissioning and programming of data acquisition and telecommunication systems.
1987-1991	Researcher, ITER program responsible person Nuclear Research Institute, Husinec-Rez Research on the experimental eutectic LiPb cooling circuit. Fluid flow and heat transfer modelling.

Membership in professional societies, committees, editorial boards, ...

2023 - now	Member of the Doctoral Programme Board Board of the Doctoral programme Physical Engineering of FNSPE CTU
2021	Member of the Programme Committee of the International Scientific Conference 20th Conference of Czech and Slovak Physicists
2017	Organization committee member Workshop Outer vessel steady state sensors manufacturing readiness review
2017	Organization committee member International meeting Progress on the ITER Project and ITER Diagnostics
2016	Guest editor of the special issue of SOFT 2016 Fusion and Engineering Design Journal
2016	Local organization committee member Symposium on Fusion Technology SOFT 2016 5 - 9. 9. 2016, Praha
2014-2022	CFS committee member Czech Physical Society
2014-2015	European Fusion Laboratory Liaison Officer of the Czech Republic Fusion for Energy, European Union’s Joint Undertaking for ITER and the Development of Fusion Energy
2014-2015	Project board member EUROfusion WPDIV Project board

Supervised students

2021 - now	Ing. Michal Cihlář PhD study Molten salt technology
2022 - now	Ing. Alžběta Endrychová PhD study Behavior of Cr-coated fuel blanket during LOCA accident and construction of (Cr+Zr1Nb)-O phase diagram.
2018 - now	Ing. Miroslav Gleitz PhD study Cooling of fusion reactors
2023 - now	Jan Hušek Preparation of Bc. diploma work Energy utilization of nuclear fusion
2024 - now	Ing. Jan Loskot PhD study Modelling and optimisation of fusion power plants
2023 - now	Šimon Pírek Preparation of Bc. diploma work Fusion power plant heat exchangers
2022 - now	Ing. Vojtěch Smolík PhD study Thermohydraulic parameters of porous materials based cooling channels
2024 - now	Josef Tuček Practical training Planar Hall Effect Measurements of Hall Sensors with Antimony Sensitive Layer
2021-2022	Bc. Vojtěch Smolík Diploma thesis High heat flux technology
2021-2022	Bc. Jiří Králík Diploma thesis Fusion fuels and their environmental impact
2021-2022	Jan Loskot Bachelor thesis Energy storages for fusion power plants
2021-2022	Viktor Hejlíček Bachelor thesis Metallic Hall sensors for fusion power plants
2021-2022	Aleš Procházka Bachelor thesis Liquid metals technology for fusion reactors
2020-2021	Dominik František Bachelor thesis Fusion power source and its comparison with used energy sources
2020-2021	Vít Šneberger Bachelor thesis Cooling of high heat fluxes in fusion reactors
2019-2020	Bc. Dominik Najman Diploma thesis Development of temperature and radiation resistant Hall sensors for fusion power plants
2019-2020	Matěj Ivánek Bachelor thesis Hall sensors properties
2019-2020	Matyáš Junek Bachelor thesis Energy use of nuclear fusion
2019-2020	Vojtěch Smolík Bachelor thesis Lawson criterion - the basis of fusion energy
2017-2018	Dominik Najman Bachelor thesis Energy utilization of nuclear fusion
2017-2018	Jakub Rybín Bachelor thesis Nuclear fusion
2015-2017	Bc. Vojtěch Pitoňák Diploma thesis Design of experimental equipment for the study of the subcooled flow boiling.
2015-2016	Bc. Václav Písek Diploma thesis Verification of applicability of CFD methods for the subcooled boiling flow modelling.
2015-2016	Ondřej Chmelař (cancelled) Bachelor thesis Fusion Power Reactor
2014-2015	Bc. Stanislav Malec Diploma thesis Cooling of the first wall of the water cooled blanket of fusion reactor DEMO.
2014-2016	Bc. Ján Uličný Diploma thesis Heat transfer analysis first wall panels of ITER.
2013	Bram Wolf Erasmus practical training Electron beam irradiation heating efficiency.

Research projects

2021-2027	Implementation of activities described in the Roadmap to Fusion during Horizon Europe through a joint programme of the members of the EUROfusion consortium Co-investigator Provider: EURATOM/MEYS of CR; Project ID: 101052200
2022-2026	Advanced technologies for nuclear fusion Investigator Provider: Czech Academy of Sciences; Project ID: Strategie AV21
2020-2025	Thermodynamic model of thermal cycles of fusion power plants with gas cooled power reactor Co-investigator Provider: TACR; Project ID: TK03030087
2020-2025	MAgnetic Sensors for Thermonuclear Energy Reactors (MASTER) Co-investigator Provider: Technological Agency of the Czech Republic; Project ID: TK03030070
2017-2023	Centre of Advanced Applied Sciences / Plasma / Thermodynamics of a fusion power plant and its cooling system Co-investigator Provider: MEYS of CR; Project ID: CZ.02.1.01/0.0/0.0/16_019/0000737
2017-2023	COMPASS-U: Tokamak for cutting-edge fusion research Co-investigator Provider: MEYS of CR; Project ID: CZ.02.1.01/0.0/0.0/16_019/0000768
2015-2023	ITER Organization Service Contract Development and fabrication of steady-state ex-vessel magnetic sensors. Co-investigator Provider: ITER; Project ID: ITER/CT/15/4300001165
2019-2021	Integration of fusion reactors into the power sector Investigator Provider: Czech Academy of Sciences; Project ID: Strategie AV21
2015-2020	Implementation of activities described in the Roadmap to Fusion during Horizon 2020 through a Joint programme of the members of the EUROfusion consortium - WPDC Co-investigator Provider: EURATOM/MEYS of CR; Project ID: No 633053/MEYS 8D15001
2018-2019	Liquid metal divertor test module experiments in COMPASS Co-investigator Provider: European Union; Project ID: WP DTT1-LMD.P1-T001-D001
2018-2018	Environmental a social impact of fusion energy Investigator Provider: Czech Academy of Sciences; Project ID: Strategie AV21
2016-2017	Seismic safety of fusion reactors Investigator Provider: Czech Academy of Sciences; Project ID: Strategie AV21
2014-2015	Implementation of activities described in the Roadmap to Fusion during Horizon 2020 through a Joint programme of the members of the EUROfusion consortium - WPBB Co-investigator Provider: EURATOM/MEYS of CR; Project ID: No 633053/MEYS 8D15001
2013-2015	High Heat Flux Test Facility for In-vessel Components and High Heat Flux testing Investigator Provider: Fusion For Energy; Project ID: F4E-OPE-319
2013-2015	Sustainable Energy SUSEN Co-investigator Provider: European Regional Development Fund, operational program Research and Development for Innovations ; Project ID: CZ.1.05/2.1.00/03.0108
1987-1991	Physics properties and models of thermonuclear reactor components. Co-investigator Provider: NRI/CSCAE; Project ID: ÚJV 773

List of Publications


2023	Jirsa M., Rameš M., Viererbl L., Duchoň J., Ďuran I., Entler S.: Exceptional structural and functional stability of Zr-doped REBaCuO tapes with respect to neutron irradiation and overheating. Superconductor Science and Technology 36 [7] (2023) č. článku 075005. [ Abstract ] [ Link ]
	Entler S., Horáček J., Ficker O., Kovařík K., Mlynář J.: Lawsonovo kritérium. Praha: Academia, 2023. 51 s. Edice Strategie AV21. ISBN 978-80-200-3449-6 [ EN ] [ Abstract ]
	Entler S., Ďuran I., Šimonovský M., Řeboun J., Turjanica P., Šobáň Z., Sládek P., Viererbl L.: Antimony Hall sensor testing at ITER and DEMO relevant temperatures. Fusion Engineering and Design 189 [April] (2023) č. článku 113476. [ Abstract ] [ Link ]
	Weinzettl V., Bílková P., Ďuran I., Hron M., Pánek R., Markovič T., Varavin M., Cavalier J., Kovařík K., Torres A., Matveeva E., Böhm P., Ficker O., Horáček J., Čeřovský J., Zajac J., Adámek J., Dimitrova M., Imríšek M., Šos M., Tomešová E., Vondráček P., Mikszuta-Michalik K., Svoboda J., Naydenkova D., Bogár K., Čaloud J., Ivanov V., Lukeš S., Podolník A., Bogár O., Entler S., Havránek A., Preinhaelter J., Jaulmes F., Dejarnac R., Balner V., Veselovský V., Bělina P., Král M., Gerardin J., Vlček J., Tadros M., Turjanica P., Kindl V., Reboun J., Rowan W., Houshmandyar S., Scholz M., Bielecki J., Makowski D., Chernyshova M., Cipciar D.: Development of the diagnostic tools for the COMPASS-U tokamak and plans for the first plasma. Fusion Engineering and Design 191 [June] (2023) č. článku 113545. [ Abstract ] [ Link ]
	Smolík V., Gleitz M., Entler S., Zacha P.: Hypervapotron High Heat Flux Cooling Numerical and Experimental Study. Proceedings of the 10th International Conference on Fluid Flow, Heat and Mass Transfer. Orleans: Avestia Publishing, 2023, (2023), č. článku 181. ISBN 978-1-990800-24-5. ISSN 23693029. [ Abstract ] [ Link ] [10th International Conference on Fluid Flow, Heat and Mass Transfer. Ottawa (CA), 07.06.2023-09.06.2023]
	Junek M., Štěpánek J., Jun G. C., Zácha P., Entler S.: 1D Modelling of Printed Circuit Heat Exchanger for Demo Fusion Power Plant. Proceedings of the 10th International Conference on Fluid Flow, Heat and Mass Transfer. Orleans: Avestia Publishing, 2023, č. článku 182. ISBN 978-1-990800-24-5. ISSN 23693029. [ Abstract ] [ Link ] [10th International Conference on Fluid Flow, Heat and Mass Transfer. Ottawa (CA), 07.06.2023-09.06.2023]
	Cihlář M., Entler S., Zácha P., Dostál V., Prehradný J., Špaček J.: The Design of the Scaled-down Experimental Device for Molten Salts. Proceedings of the 10th International Conference on Fluid Flow, Heat and Mass Transfer. Orleans: Avestia Publishing, 2023, č. článku 183. ISBN 978-1-990800-24-5. ISSN 23693029. [ Abstract ] [ Link ] [10th International Conference on Fluid Flow, Heat and Mass Transfer. Ottawa (CA), 07.06.2023-09.06.2023]
	Cihlář M., Entler S., Loskot J., Dostál V., Prehradný J., Zácha P.: Molten salts evaluation for application in the fusion power plant's intermediate heat transfer system. Fusion Engineering and Design 194 [September] (2023) č. článku 113907. [ Abstract ] [ Link ]
	Smolík V., Gleitz M., Zácha P., Entler S.: Commissioning of the inductive heater for hypervapotron testing. Fusion Engineering and Design 194 [September] (2023) č. článku 113928. [ Abstract ] [ Link ]
	Entler S., Horáček J., Ficker O., Kovařík K., Kolovratník M., Dostál V.: Estimation of fuel operating ranges of fusion power plants. Nuclear Engineering and Technology 55 [7] (2023) 2687-2696. [ Abstract ] [ Link ]
	Syblík J., Štěpánek J., Veselý L., Entler S., Dostál V.: Preliminary design of supercritical CO2 axial compressor for fusion and nuclear power plants. Fusion Engineering and Design 192 [July] (2023) č. článku 113770. [ Abstract ] [ Link ]
	Syblík J., Veselý L., Štěpánek J., Entler S., Dostál V.: Techno-economic comparison of DEMO power conversion systems. Energy Reports 9 [December] (2023) 2777-2786. [ Abstract ] [ Link ]
2022	Entler S., Pánek R.: Česká stopa v projektu ITER. Jaderná energie 3 [1] (2022) 44-51. [ EN ] [ Abstract ]
	Entler S.: Jaderná fúze: budoucnost jaderné energetiky. Jaderná energie 3 [1] (2022) 20-27. [ EN ] [ Abstract ]
	Ďurďovič M., Entler S., Horáček J., Málek J., Syblík J., Wagner V.: Malé modulární reaktory. Praha: Středisko společných činností AV ČR, 2022. 56 s. Strategie AV21. [ EN ] [ Abstract ]
	Štepánek J., Syblík J., Entler S.: Axial sCO2 high-performance turbines parametric design. Energy Conversion and Management 274 [December] (2022) č. článku 116418. [ Abstract ] [ Link ]
	Horáček J., Lukeš S., Adámek J., Havlíček J., Entler S., Seidl J., Cavalier J., Cikhardt J., Sedmidubsky V.: Novel concept suppressing plasma heat pulses in a tokamak by fast divertor sweeping. Scientific Reports 12 [1] (2022) č. článku 17013. [ Abstract ] [ Link ]
	Syblík J., Entler S., Veselý L., Štěpánek J., Dostál V.: Fusion DEMO sCO2 layout design with battery farm. Energy 249 [June] (2022) č. článku 123730. [ Abstract ] [ Link ]
	Hron M., Adámek J., Cavalier J., Dejarnac R., Ficker O., Grover O., Horáček J., Komm M., Macúšová E., Matveeva E., Pánek R., Peterka M., Seidl J., Tskhakaya D., Yanovskiy V., Artola F. J., Atikukke S., Bartoň P., Bencze A., Berta M., Bílková P., Bin W., Bogár K., Bogár O., Böhm P., Borodkina I., Brezinsek S., Brochard F., Buratti P., Čaloud J., Casolari A., Castaldo C., Čečrdle J., Čeřovský J., Cipciar A., Devitre A., Dimitrova M., Ďuran I., Entler S., Farník M., Fernandes H., Fridrich D., Fuková Š., Gauthier E., Gerardin J., Gobbin M., Grenfell G., Gribov Y., Grof M., Gunn J., Háček P., Havlíček J., Havránek A., Hidalgo C., Hromasová K., Hronová-Bilyková O., Iafrati M., Imríšek M., Isernia N., Jaulmes F., Jeřáb M., Jirsa M., Junek P., Kallenbach A., Kovanda O., Kovařík K., Krbec J., Kripner L., Krlín L., Kulhánek P., Lehnen M., Lemoine N., Litaudon X., Liu Y.Q., Logan N. C., Loarer T., Loarte A., Lourenco P., Lukeš S., Mácha P., Rabinski M., Marin Roldan A., Markovič T., Matějíček J., Mazzitelli G., Mlynář J., Mysiura I., Napoli F., Naydenkova D., Park J. K., Patel N., Pavlo P., Pitts R., Podolník A., Poradzinski M., Preinhaelter J., Prishvitsin A., Refy D., Roccella R., Šesták D., Shyshkin O., Škvára V., Šos M., Spolaore M., Stöckel J., Svoboda J., Tomeš M., Torres A., Turjanica P., Tynan G., Valovič M., Van Oost G., Varavin M., Varju J., Veis P., Vilémová M., Villone F., Vondráček P., Weinzettl V., Žáček F., Zadvitskiy G., Zajac J., Zaloga D., Zebrowski J., Zoletnik S.: Overview of the COMPASS results. Nuclear Fusion 62 [4] (2022) č. článku 042021. [ Abstract ] [ Link ]
	Cihlář M., Entler S., Czakoj T., Dostál V., Prehradný J., Zácha P.: Preliminary Neutronics Study of an Accelerator-Driven Molten Spallation Target–Molten Lithium Source of Tritium. Fusion Science and Technology 79 [2] (2022) 104-116. [ Abstract ] [ Link ]
2021	Syblik J., Entler S., Štepánek J., Dostál V., Zacha P., Veselý L.: Optimization of S-CO2 power conversion layouts with energy storage for the pulsed DEMO reactor. Fusion Engineering and Design 169 [August] (2021) č. článku 112609. [ Abstract ] [ Link ]
	Entler S., Syblik J., Dostál V., Štepánek J., Zacha P.: Optimization of the supercritical CO2 power conversion system based on the net efficiency under conditions of the pulse-operated fusion power reactor DEMO. Applied Thermal Engineering 194 [July] (2021) č. článku 116884. [ Abstract ] [ Link ]
	Entler S., Ďuran I., Kocan M., Vayakis G., Sládek P., Grover O., Šebek J., Výborný K.: Calibration of the ITER outer vessel steady-state magnetic sensors. Fusion Engineering and Design 168 [July] (2021) č. článku 112398. [ Abstract ] [ Link ]
	Zacha P., Zabcikova M., Entler S., Štepánek J., Dostál V., Syblik J.: Conceptual model of a solid energy storage for the pulsed demonstration fusion power plant. Fusion Engineering and Design 168 [July] (2021) č. článku 112416. [ Abstract ] [ Link ]
	Štěpánek J., Entler S., Syblik J., Veselý L., Dostál V., Zacha P.: Comprehensive comparison of various working media and corresponding power cycle layouts for the helium-cooled DEMO reactor. Fusion Engineering and Design 166 [May] (2021) č. článku 112287. [ Abstract ] [ Link ]
	Horáček J., Cecrdle J., Tskhakaya D., Dejarnac R., Schwartz J., Komm M., Cavalier J., Adámek J., Lukeš S., Veselovský V., Varju J., Bartoň P., Entler S., Gasparyan Y., Gauthier E., Gerardin J., Hromádka J., Hron M., Iafrati M., Imríšek M., Jeřáb M., Kovařík K., Mazzitelli G., Naydenkova D., van Oost G., Pánek R., Prishvitsin A., Seidl J., Šesták D., Tomeš M., Vasina Y., Vertkov A., Vondráček P., Weinzettl V.: Predictive modelling of liquid metal divertor: From COMPASS tokamak towards Upgrade. Physica Scripta 96 [12] (2021) č. článku ac1dc9. [ Abstract ] [ Link ]
	Entler S.: Bezpečnost fúzních elektráten. Řízení rizik procesů, zařízení a bezpečnost složitých technických děl. Praha: ČVUT v Praze, 2021, s. 249-256. ISBN 978-80-01-06906-6 [ EN ] [ Abstract ] [ Link ]
	Entler S., Horáček J., Málek J.: Nové jaderné zdroje energie. Energetika 71 [4] (2021) 227-231. [ EN ] [ Abstract ]
	Vondráček P., Pánek R., Hron M., Havlíček J., Weinzettl V., Todd T., Tskhakaya D., Cunningham G., Háček P., Hromádka J., Junek P., Krbec J., Patel N., Šesták D., Varju J., Adámek J., Balázsová M., Balner V., Bartoň P., Bielecki J., Bílková P., Błocki J., Bocian D., Bogár K., Bogár O., Boócz P., Borodkina I., Brooks A., Böhm P., Burant J., Casolari A., Cavalier J., Chappuis R., Dejarnac R., Dimitrova M., Dudák M., Ďuran I., Ellis R., Entler S., Fang J., Farník M., Ficker O., Fridrich D., Fuková Š., Gerardin J., Hanák I., Havránek A., Herrmann A., Horáček J., Hronová-Bilyková O., Imríšek M., Isernia N., Jaulmes F., Jeřáb M., Kindl V., Komm M., Kovařík K., Král M., Kripner L., Macúšová E., Majer T., Markovič T., Matveeva E., Mikszuta-Michalik K., Mohelník M., Mysiura I., Naydenkova D., Němec I., Ortwein R., Patočka K., Peterka M., Podolník A., Procházka F., Převrátil J., Řeboun J., Scalera V., Scholz M., Svoboda J., Swierblewski J., Šos M., Tadros M., Titus J. H., Tomeš M., Torres A., Tracz G., Turjanica P., Varavin M., Veselovský V., Villone F., Wąchal P., Yanovskiy V., Zadvitskiy G., Zajac J., Žák A., Zaloga D., Zelda J., Zhang H.: Preliminary design of the COMPASS upgrade tokamak. Fusion Engineering and Design 169 [August] (2021) č. článku 112490. [ Abstract ] [ Link ]
	Entler S., Šobáň Z., Ďuran I., Kovařík K., Výborný K., Šebek J., Tazlaru S., Střeleček J., Sládek P.: Ceramic-chromium hall sensors for environments with high temperatures and neutron radiation. Sensors 21 [3] (2021) 1-12, č. článku 721. [ Abstract ] [ Link ]
2020	Kovařík K., Entler S., Ďuran I., Eade T.: Analysis of Transmutation of Candidate Sensitive Layer Materials of Hall Detectors under DEMO Like Neutron Fluxes. Fusion Engineering and Design 155 [June] (2020) č. článku 111670. [ Abstract ] [ Link ]
	Horáček J., Dejarnac R., Cecrdle J., Tskhakaya D., Vertkov A., Cavalier J., Vondráček P., Jeřáb M., Bartoň P., Van Oost G., Hron M., Weinzettl V., Šesták D., Lukeš S., Adámek J., Prishvitsin A., Iafratti M., Gasparyan A.A., Vasina Y., Naydenkova D., Seidl J., Gauthier E., Mazzitelli G., Komm M., Gerardin J., Varju J., Tomeš M., Entler S., Hromádka J., Pánek R.: Modeling of COMPASS tokamak divertor liquid metal experiments. Nuclear Materials and Energy 25 [December] (2020) č. článku 100860. [ Abstract ] [ Link ]
	Štěpánek J., Entler S., Syblik J., Veselý L., Dostál V., Zacha P.: Parametric study of S-CO2 cycles for the DEMO fusion reactor. Fusion Engineering and Design 160 [November] (2020) č. článku 111992. [ Abstract ] [ Link ]
	Veselý L., Syblik J., Entler S., Štepánek J., Zacha P., Dostál V.: Optimization of Supercritical CO2 Power Conversion System with an Integrated Energy Storage for the Pulsed DEMO. IEEE Transactions on Plasma Science 48 [6] (2020) 1715-1720, č. článku 900. [ Abstract ] [ Link ]
	Entler S., Ďuran I., Kovařík K., Sládek P., Grover O., Vilémová M., Najman D., Kohout M., Šebek J., Výborný K., Šobáň Z.: Temperature dependence of the Hall coefficient of sensitive layer materials considered for DEMO Hall sensors. Fusion Engineering and Design 153 [April] (2020) č. článku 111454. [ Abstract ] [ Link ] [14th International Symposium on Fusion Nuclear Technology. Budapešť, 22.09.2019-27.09.2019]
	Gleitz M., Zacha P., Entler S., Syblík J.: Design of experimental device for testing of subcooled flow boilling. Engineering Mechanics. In: ENGINEERING MECHANICS 2020. Brno: Brno University of Technology Institute of Solid Mechanics, Mechatronics and Biomechanics, 2020 - (Fuis, V.), (2020), s. 150-153. ISBN 978-80-214-5896-3. ISSN 1805-8248. [ Abstract ] [ Link ] [26th International Conference on Engineering Mechanics. Brno (CZ), 24.11.2020-25.11.2020]
2019	Syblik J., Veselý L., Entler S., Dostál V., Štěpánek J.: Advanced S-CO2 Brayton power cycles in nuclear and fusion energy. Proceedings of the ASME Turbo Expo. Phoenix: American Society of Mechanical Engineers, 2019, Roč. 9 (2019), č. článku GT2019-90777. ISBN 9780791858721. [ Abstract ] [ Link ] [ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. Phoenix (US), 17.06.2019-21.06.2019]
	Entler S.: Výzkum termojaderného plazmatu na tokamaku COMPASS. Praha: Středisko společných činností AV ČR, 2019. 72 s. ISBN 978-80-200-3109-9 [ EN ] [ Abstract ]
	Entler S., Ficker O., Havlíček J., Horáček J., Hron M., Mlynář J., Pánek R., Řípa M., Stöckel J., Varju J., Weinzettl V.: Budoucnost energetiky: jaderná fúze. Praha: Středisko společných činností AV ČR, 2019. 73 s. ISBN 978-80-200-3007-8 [ EN ] [ Abstract ]
	Weinzettl V., Adámek J., Bílková P., Havlíček J., Pánek R., Hron M., Bogár O., Böhm P., Casolari A., Cavalier J., Dejarnac R., Dimitrova M., Ďuran I., Entler S., Ficker O., Háček P., Horáček J., Imríšek M., Jaulmes F., Kovařík K., Krbec J., Kripner L., Markovič T., Naydenkova D., Peterka M., Podolník A., Pova F., Šos M., Šesták D., Tomeš M., Varavin M., Varju J., Vondráček P., Zajac J.: Constraints on conceptual design of diagnostics for the high magnetic field COMPASS-U tokamak with hot walls. Fusion Engineering and Design 146 [September] (2019) 1703-1707. [ Abstract ] [ Link ]
	Ďuran I., Entler S., Grover O., Bolshakova I., Výborný K., Kocan M., Jirman J., Vayakis G., Vasyliev O., Radishevskyi M., Wang Z. C., Neumaier D.: Status of steady-state magnetic diagnostic for ITER and outlook for possible materials of Hall sensors for DEMO. Fusion Engineering and Design 146 [September] (2019) 2397-2400. [ Abstract ] [ Link ]
	Entler S., Ďuran I., Kocan M., Vayakis G., Kohout M., Šebek J., Sládek J., Grover O., Výborný K.: Prospects for the steady-state magnetic diagnostic based on antimony Hall sensors for future fusion power reactors. Fusion Engineering and Design 146 [January] (2019) 526-530. [ Abstract ] [ Link ]
	Biel W., Albanese R., Ambrosino R., Ariola M., Berkel M. V., Bolshakova I., Brunner K. J., Cavazzana R., Cecconello M., Conroy S., Dinklage A., Ďuran I., Dux R., Eade T., Entler S., Ericsson G., Fable E., Farina D., Figini L., Finotti C., Franke T., Giacomelli L., Giannone L., Gonzalez W., Hjalmarsson A., Hron M., Janky F., Kallenbach A., Kogoj J., König R., Kudláček O., Luis R., Malaquias A., Marchuk O., Marchiori G., Mattei M., Maviglia F., De Masi G., Mazon D., Meister H., Meyer K., Micheletti D., Nowak S., Piron C., Pironti A., Rispoli N., Rohde V., Sergienko G., El Shawish S., Siccinio M., Silva A., da Silva F., Sozzi C., Tardocchi M., Tokar M., Treutterer W., Zohm H.: Diagnostics for plasma control – From ITER to DEMO. Fusion Engineering and Design 146 [September] (2019) 465-472. [ Abstract ] [ Link ]
	Syblik J., Veselý L., Entler S., Štepánek J., Dostál V.: Analysis of supercritical CO2 Brayton power cycles in nuclear and fusion energy. Fusion Engineering and Design 146 (2019) 1520-1523. [ Abstract ] [ Link ]
	Zacha P., Entler S.: High heat flux limits of the fusion reactor water-cooled first wall. Nuclear Engineering and Technology 51 [5] (2019) 1251-1260. [ Abstract ] [ Link ]
2018	Entler S., Horáček J., Dlouhý T., Dostál V.: Approximation of the economy of fusion energy. Energy 152 [June] (2018) 489-497. [ Abstract ] [ Link ]
	Horáček J., Entler S., Vondráček P., Adámek J., Šesták D., Hron M., Pánek R., Dejarnac R., Weinzettl V., Kovařík K., Van Oost G.: Plans for Liquid Metal Divertor in Tokamak Compass. Plasma Physics Reports 44 [7] (2018) 652-656. [ Abstract ] [ Link ] [International Symposium on Liquid metals Applications for Fusion (ISLA2017) /5./. Moscow, 25.09.2017-27.09.2017]
	Kocan M., Ďuran I., Entler S., Vayakis G., Agostinetti P., Brombin M., Carmona M.J., Gambetta M., Jirman T., Marconato N., Moreau P., Peruzzo S., Spuig P., Walsh M.: Steady state magnetic sensors for ITER and beyond: Development and final design. Review of Scientific Instruments 89 [10] (2018) č. článku 10J119. [ Abstract ] [ Link ]
	Horáček J., Entler S., Vondráček P., Adámek J., Šesták D., Hron M., Pánek R., Dejarnac R., Weinzettl V., Kovařík K., Van Oost G.: PLANIRUYEMYY ZHIDKOMETALLICHESKIY DIVERTOR DLYA TOKAMAKA COMPASS. FIZIKA PLAZMY. Moskva, 2018, s. 557-563. ISSN 0367-2921. [ EN ] [ Abstract ] [ Link ] [International symposium on liquid metals applications for fusion (ISLA-5). Moskva (RU), 25.09.2017-25.09.2017]
	Entler S., Šebek J., Ďuran I., Výborný K., Kocan M., Vayakis G.: High magnetic field test of the ITER outer vessel steady-state magnetic field Hall sensors at ITER relevant temperature. Review of scientific instruments 89 [10] (2018) č. článku 10J112. [ Abstract ] [ Link ]
	Entler S., Kocan M., Ďuran I., Vayakis G., Lucca F., Vigano F., Cantu R.: Recent Improvement of the Design of the ITER Steady-State Magnetic Sensors. IEEE Transactions on Plasma Science 46 [5] (2018) 1276-1280. [ Abstract ] [ Link ]
	Pánek R., Entler S.: Systémy pro jadernou energetiku. Energetika 68 [6] (2018) 356-361. [ EN ] [ Abstract ]
2017	Entler S., Dostál V.: Jaderná bezpečnost fúzních elektráren a jejich vliv na životní prostředí. Bezpečnost jaderné energie 25 [9-10] (2017) 262-268. [ EN ] [ Abstract ]
	Ďuran I., Entler S., Kočan M., Kohout M., Viererbl L., Mušálek R., Chráska T., Vayakis G.: Development of Bismuth Hall sensors for ITER steady state magnetic diagnostics. Fusion Engineering and Design 123 [November] (2017) 690-694. [ Abstract ] [ Link ] [SOFT 2016: Symposium on Fusion Technology /29./. Prague, 05.09.2016-09.09.2016]
	Entler S., Ďuran I., Sládek P., Vayakis G., Kočan M.: Signal conditioning and processing for metallic Hall sensors. Fusion Engineering and Design 123 [November] (2017) 783-786. [ Abstract ] [ Link ] [SOFT 2016: Symposium on Fusion Technology /29./. Prague, 05.09.2016-09.09.2016]
	Štepánek J., Bláha V., Dostál V., Entler S.: Effective water cooling of very hot surfaces during the LOCA accident. Fusion Engineering and Design 124 [November] (2017) 1211-1214. [ Abstract ] [ Link ] [SOFT 2016: Symposium on Fusion Technology /29./. Prague, 05.09.2016-09.09.2016]
	Horáček J., Cunningham G., Entler S., Dobias P., Duban R., Imríšek M., Markovič T., Havlíček J., Enikeev R.: Feasibility study of fast swept divertor strike point suppressing transient heat fluxes in big tokamaks. Fusion Engineering and Design 123 [November] (2017) 646-649. [ Abstract ] [ Link ] [SOFT 2016: Symposium on Fusion Technology /29./. Prague, 05.09.2016-09.09.2016]
	Kocan M., Ďuran I., Entler S., Vayakis G., Carmona M.J., Gitton P., Guirao J., Gonzalez M., Iglesias S., Pascual Q., Sandford G., Vacas C., Walsh M., Walton R.: Final design of the ITER outer vessel steady-state magnetic sensors. Fusion Engineering and Design 123 [November] (2017) 936-939. [ Abstract ] [ Link ] [SOFT 2016: Symposium on Fusion Technology /29./. Prague, 05.09.2016-09.09.2016]
	Jirsa M., Rameš M., Ďuran I., Entler S., Melíšek T., Kováč P., Viererbl L.: Electromagnetic properties of REBaCuO superconducting tapes considered for magnets of fusion reactors. Fusion Engineering and Design 124 [November] (2017) 73-76. [ Abstract ] [ Link ] [SOFT 2016: Symposium on Fusion Technology /29./. Prague, 05.09.2016-09.09.2016]
	Veselý L., Dostál V., Entler S.: Study of the cooling systems with S-CO2 for the DEMO fusion power reactor. Fusion Engineering and Design 124 [November] (2017) 244-247. [ Abstract ] [ Link ] [SOFT 2016: Symposium on Fusion Technology /29./. Prague, 05.09.2016-09.09.2016]
	Prokůpek J., Samec K., Jílek R., Gavila P., Neufuss S., Entler S.: HELCZA-High heat flux test facility for testing ITER EU first wall components. Fusion Engineering and Design 124 [November] (2017) 187-190. [ Abstract ] [ Link ] [SOFT 2016: Symposium on Fusion Technology /29./. Prague, 05.09.2016-09.09.2016]
	Entler S., Ďuran I.: Kovové Hallovy senzory. Československý časopis pro fyziku 67 [2] (2017) 91-100. [ EN ] [ Abstract ]
	Entler S., Málek J., Brokešová J.: Moderní trendy seismického zabezpečení jaderných elektráren. Bezpečnost jaderné energie 25 [7-8] (2017) 218-224. [ EN ] [ Abstract ]
	Entler S., Dlouhý T., Dostál V., Horáček J.: Ekonomika fúzní energetiky. Energetika 67 [5] (2017) 318-323. [ EN ] [ Abstract ]
	Entler S., Kolovratník M., Dostál V.: Recirkulace výkonu ve fúzních elektrárnách. Energetika 67 [4] (2017) 247-250. [ EN ] [ Abstract ]
	Entler S., Málek J., Brokešová J.: Moderní trendy seismického zabezpečení jaderných elektráren. Energetika 67 [3] (2017) 179-184. [ EN ] [ Abstract ]
	Entler S., Ďuran I., Kocan M., Vayakis G.: Investigation of linearity of the ITER outer vessel steady-state magnetic field sensors at high temperature. Journal of Instrumentation 12 [7] (2017) č. článku C07007. [ Abstract ] [ Link ] [European Conference on Plasma Diagnostics (ECPD2017)/2./. Bordeaux, 18.04.2017-21.04.2017]
2016	Entler S., Mlynář J., Dostál V.: Základy fúzní energetiky V. – Výroba elektřiny. o. Září (2016) č. článku 14704. [ EN ] [ Abstract ] [ Link ]
	You J.H., Mazzone F., Visca E., Bachmann Ch., Autissier E., Barrett T., Cocilovo V., Crescenzi F., Domalapally P.K., Dongiovanni D., Entler S., Federici G., Frosi P., Fursdon M., Greuner H., Hancock D., Marzullo D., McIntosh S., Müller A.V., Porfiri M.T., Ramogida G., Reiser J., Richou M., Rieth M., Rydzy A., Villari R., Widak V.: Conceptual design studies for the European DEMO divertor: Rationale and first results. Engineering and Design. [November] (2016) 1598-1603. [ Abstract ] [ Link ] [International Symposium on Fusion Nuclear Technology (ISFNT-12)/12./. Jeju, 14.09.2015-18.09.2015]
	Entler S., Kysela J.: Overview on Fusion Nuclear Technology Experimental Testing. Journal of Nuclear Engineering and Radiation Science 2 [2] (2016) č. článku 021018. [ Abstract ] [ Link ]
	Entler S., Mlynář J., Dostál V.: Základy fúzní energetiky IV. – Jaderné komponenty. (2016) . [ EN ] [ Abstract ] [ Link ]
	Entler S., Mlynář J., Dostál V.: Základy fúzní energetiky III. – Reaktorové technologie. o. Srpen (2016) č. článku 14587. [ EN ] [ Abstract ] [ Link ]
	Entler S., Mlynář J., Dostál V.: Základy fúzní energetiky II, Základní fyzika fúzních reaktorů. tzb-info (2016) . [ EN ] [ Abstract ] [ Link ]
	Entler S., Mlynář J., Dostál V.: Základy fúzní energetiky I. – Historie. o. červenec (2016) č. článku 14482. [ EN ] [ Abstract ] [ Link ]
	Ďuran I., Entler S., Kohout M., Kocan M., Vayakis G.: High magneticfield test of Bismuth Hall sensors for ITER steady state magnetic diagnostic. Review of Scientific Instruments 87 [11] (2016) č. článku 11D446. [ Abstract ] [ Link ] [Topical Conference on High-Temperature Plasma Diagnostics (HTPD2016) /21./. Madison, Wisconsin, 05.06.2016-09.06.2016]
	Entler S., Mlynář J.: Spoutání slunce. Spoutání slunce. Vol. Ediční číslo 12031. Ediční číslo 12031. Praha: Středisko společných činností AV ČR, v. v. i., 2016 - (Královcová, P.), s. 1-24. Věda kolem nás \| Výzvy a otázky, 50 [ EN ] [ Abstract ]
	Veselý L., Dostál V., Entler S.: COMPARISON OF S-CO2 POWER CYCLES FOR NUCLEAR ENERGY. Acta Polytechnica CTU Proceedings. Prague: Czech Technical University in Prague, 2016 - (Vojtěch Caha, V.; Cesnek, M.; Kecek, A.; Ševeček, M.; Štefánik, M.), s. 107-112. ISBN 978-80-01-06069-8. E-ISSN 2336-5382. [ Abstract ] [ Link ] [Czecho-Slovak Student Conference on Nuclear Engineering, ŠIMÁNĚ 2016. Šimáně (CZ), 12.05.2016-13.05.2016]
2015	Entler S.: Fúzní palivo a obnovitelné zdroje. Energetika 65 [5] (2015) 249-252. [ EN ] [ Abstract ] [ Link ]
	Entler S., Řípa M.: Je to tady! Blíží se fúzní elektrárna!. http://www.3pol.cz/cz/rubriky/jaderna-fyzika-a-energetika/1664-je-to-tady-blizi-se-fuzni-elektrarna, 24.3.2015 [ Abstract ] [ Link ]
	Entler S.: České fúzní čtvrtstoletí. Co děláme pro projekt „umělého slunce“. iDnes.cz, http://technet.idnes.cz/jaderna-fuze-cesko-039-/veda.aspx?c=A150129_152739_veda_mla, 3.2.2015 [ Abstract ] [ Link ]
	Entler S., Prokůpek J., Kovařík P., et al.: Experimental Complex HELCZA Initial Report. CVR 371/Fusion for Energy IDM 3A2FHF/3.0, Řež, 2015 [ Abstract ]
	Kysela J., Entler S., Všolák R., Klabík T., Zlámal O., Bellin B., Zacchia F.: In-pile testing of ITER first wall mock-ups at relevant thermal loading conditions in the LVR-15 nuclear research reactor. Fusion Engineering and Design, 98–99 (2015) 1271–1275. [ Abstract ] [ Link ] [ DOI ]
	Entler S.: Fúzní palivo a obnovitelné zdroje. Energetika 5 (2015) 249-252 [ Abstract ]
	Entler S.: Jaderná fúze – budoucnost energetiky. Energetika 3 (2015) 136-142 [ Abstract ]
	Entler S.: Engineering Breakeven. Journal of Fusion Energy, 34 (2015) 513-518 [ Abstract ] [ Link ] [ DOI ]
	Entler S.: Komentář k článku „Uspěje jaderná fúze v menších zařízeních?“. Energetika 6 (2015) 353 [ Abstract ]
	Domalapally P. K., Entler S.: Comparison of cooling schemes for high heat flux components cooling in fusion reactors. Acta Polytechnica 55 (2015) 86–95 [ Abstract ] [ Link ] [ DOI ]
	Prokůpek J., Entler S., Gavila P., Bellin B., Zacchia F. and Mitteau R.: ITER EU First Wall Panels Full Size High Heat Flux Testing. International Conference on Plasma-Facing Materials and Components PFMC-15, Aix-en-Provence, France, 2015. [ Abstract ]
	Entler S.: Estimation of the DEMO Net Efficiency. International Symposium on Fusion Nuclear Technology ISFNT 12, Jeju Island, Republic of Korea, 2015 [ Abstract ]
2014	Entler S.: Je jaderná fúze obnovitelný zdroj?. TZB-info 5 (2014) [ Abstract ] [ Link ]
	Entler S.: Historie aplikovaného výzkumu jaderné fúze v Řeži . Centrum výzkumu Řež s.r.o., Řež, 2014 [ Abstract ]
	Entler S.: Lawson Criterion of DEMO Fusion Power Plant. Symposium on Nuclear Technology SOFT 28, San Sebastian, Spain, 2014. [ Abstract ]
	Entler S.: TBM- Cesta k fúzní elektřině, . MAT21 Materiály pro nové tisíciletí 7 (2014) 7-8 [ Abstract ]
	Entler S.: Lawsonovo kritérium – kritérium fúzní energetiky. Čes. časopis pro fyziku 64 (2014) 161-167 [ Abstract ]
	Entler S., at al., : Experimental Complex HELCZA Preliminary Design. CVR 271, Centrum výzkumu Řež s.r.o., Řež, 2014 [ Abstract ]
2013	Entler S., Všolák R. : Testing of FW mock-ups under representative operating conditions, International Symposium of Fusion Nuclear Technology. International Symposium on Fusion Nuclear Technology ISFNT-11, Barcelona, Spain, 2013 [ Abstract ]
	Entler S.: Elektřina z fúze (III) - reaktory ITER, HiPER a DEMO. TZB-info 26 (2013) [ Abstract ] [ Link ]
	Kysela J., Košek L., Entler S. : Activity of the Research Centre Rez in fusion technology, . European Nuclear Energy Forum, Prague, 2013 [ Abstract ]
	Entler S.: Elektřina z fúze (II) - fyzikální základy. TZB-info 25 (2013) [ Abstract ] [ Link ]
	Entler S.: Elektřina z fúze (I). TZB-info 24 (2013) [ Abstract ] [ Link ]
	Všolák R., Entler S.: High heat flux test facility Helcza for PFC testing. Plasma Facing Materials and Components PFMC-14, Juelich, Germany, 2013 [ Abstract ]
	Entler S.: Výzkum technologie jaderné fúze. Vesmír 92 (2013) 622-625 [ Abstract ]
	Entler S.: Materiály pro jadernou fúzi . MAT21 Materiály pro nové tisíciletí 6 (2013) 5-7 [ Abstract ]
	Entler S., Wolf B.: Electron Beam Collimination . CVR 192, Centrum výzkumu Řež s.r.o., Řež, 2013 [ Abstract ]
	Entler S., Všolák R., Reungoat M.: PFW User Requirements for Technology. CVR 044R8, Centrum výzkumu Řež s.r.o., Řež, 2013 [ Abstract ]
	Entler S., a kol.: Experimentální zařízení HELCZA Enhanced design. CVR 168, Centrum výzkumu Řež s.r.o., Řež, 2013 [ Abstract ]
	Entler S.: Studie proveditelnosti experimentálního zařízení pro testování vzorků materiálu velmi vysokým tepelným tokem HHFTF. Technologická platforma pro udržitelnou energetiku TPUE, Praha, 2013 [ Abstract ]
	Entler S., a kol.: Experimentální zařízení HELCZA Conceptual Design . CVR 153, Centrum výzkumu Řež s.r.o., Řež, 2013 [ Abstract ]
2000	Ďuran I., Entler S.: Hallův senzor. 2020. Vlastník: Ústav fyziky plazmatu AV ČR, v. v. i. Datum udělení patentu: 16.09.2020. Číslo patentu: 308527 [ EN ] [ Abstract ]
	Ďuran I., Entler S., Šobáň Z.: Chromový Hallův senzor. 2022. Vlastník: Ústav fyziky plazmatu AV ČR, v. v. i. - Fyzikální ústav AV ČR, v. v. i. Datum udělení patentu: 21.01.2022. Číslo patentu: 309143 [ EN ] [ Abstract ]
1989	Šulc V., Entler S.: K problematice blanketu termojaderného reaktoru. Nukleon UVTEI 73-093, 4 (1989) 5-10 [ Abstract ]
1988	Entler S.: Technologie blanketu termojaderného reaktoru. ÚJV 8742-T, Ústav jaderného výzkumu, Řež, 1988 [ Abstract ]
1987	Entler S.: Inženýrské aspekty termojaderné energetiky. ÚJV 8214-T, Ústav jaderného výzkumu, Řež, 1987 [ Abstract ]