Ing. Tomáš Chráska, Ph.D. [ Scientific Worker, Head of the Department of Materials Engineering

Place: NHB, Office: H 503
Tel.: (+420) 266 053517
Email: tchraska@ipp.cas.cz

Research Interests

Nanostructured ceramic materials
Scanning Electron Microscopy
Transmission Electron Microscopy
Interfaces in thermally sprayed materials

Education

1990 - 95	M.S. Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University, Prague
1995 - 99	PhD. Stony Brook University Microstructures and interfaces of zirconia produced by plasma spray

Research experience

1999-2001

Postdoctoral researcher
University of Virginia
Materials Science & Engineering

Academic Awards

2007

Prize of Otto Wichterle
Awarded by : Academy Council of the Czech Academy of Sciences
http://data.avcr.cz/veda_a_vyzkum/oceneni/premie_wichterle/index.html

Research projects

2022-2024	Refractory complex concentrated alloys: high throughput mapping of a compositional space Principal investigator Provider: Czech Science Foundation; Project ID: GA22-24563S
2019-2021	High temperature preparation of advanced refractory materials by inductively coupled plasma in controlled atmosphere Principal investigator Provider: Czech Science Foundation; Project ID: GA19-14339S
2019-2021	Non-conventional application of field assisted sintering technique for manufacturing of lightweight materials Principal investigator Provider: Czech Science Foundation; Project ID: GA19-11275S
2015-2019	Research center of surface treatment Principal investigator Provider: Technological Agency of the Czech Republic; Project ID: TE02000011
2017-2019	Stability of the interfaces in advanced tungsten materials for high temperature environments Co-investigator Provider: Czech Science Foundation; Project ID: GA17-23154S
2017-2019	Influence of defects on properties of bio-compatible high entropy alloys Co-investigator Provider: Czech Science Foundation; Project ID: GA17-17016S
2014-2018	Multidisciplinary research centre for advanced materials Principal investigator Provider: Czech Science Foundation; Project ID: GB14-36566G
2015-2017	Ultrafine-grained and nanocrystalline metals with high strength prepared by pulsed electric current sintering Principal investigator Provider: Czech Science Foundation; Project ID: GA15-15609S
2014-2016	Interaction of hydrogen isotopes with candidate fusion materials Co-investigator Provider: Czech Science Foundation; Project ID: GA14-12837S
2013-2015	Precise powder feeding mechanism for water stabilized plasma WSP spray technology Principal investigator Provider: Technological Agency of the Czech Republic; Project ID: TA03010270
2012-2014	Thermal spray processing and high temperature structural stability of nanocrystalline thermal barrier coatings Co-investigator Provider: Czech Science Foundation; Project ID: GAP107/12/1922
2012-2014	Complex functionally graded materials Co-investigator Provider: Czech Science Foundation; Project ID: GAP108/12/1872
2013-2013	Investigation of mixed materials surface changes after interaction with laser pulses and plasma streams Co-investigator Provider: Euratom under European Fusion Development Agreement; Project ID: WP13-IPH-A01-P3-01
2010-2013	Development of stabilized plasma (WSP) torch based technology Principal investigator Provider: Ministry of Industry and Trade of the Czech Republic; Project ID: FR-TI2/702
2008-2010	Physical properties of plasma sprayed refractory materials Co-investigator Provider: Czech Science Foundation; Project ID: GA106/08/1240
2008-2010	Study of the influence of dopants on the photocatalytic activity of the plasma-sprayed titanium oxide layers Co-investigator Provider: Grant Agency of the Academy of Sciences; Project ID: IAAX00430803
2006-2009	Nanocrystallization of plasma sprayed coatings based on eutectic ceramic alloys Principal investigator Provider: Grant Agency of the Academy of Sciences; Project ID: KAN300430651
2004-2006	Evolution of ceramics coatings during plasma spraying process Principal investigator Provider: Czech Science Foundation; Project ID: GP106/04/P012
2003-2006	Amorphous & Nanocrystalline Ceramic Coatings Principal investigator Provider: Czech Academy of Sciences & National Research Council Canada; Project ID: ANCEC
2003-2005	Composition changes of ceramic and metallic materials during their plasma spraying Co-investigator Provider: Czech Science Foundation; Project ID: GA106/03/0710

List of Publications


2024	Rednyk A., Mušálek R., Tesař T., Medřický J., Tsepeleva A., Lukáč F., Ctibor P., Sedláček J., Chráska T.: Liquid plasma spraying of NiO-YSZ anode layers applicable for SOFC. Materials Today Communications 38 [March] (2024) č. článku 107855. [ Abstract ] [ Link ]
2023	Preisler D., Janovská M., Seiner H., Bodnárová L., Nejezchlebová J., Koller M., Sedlák P., Harcuba P., Veselý J., Kozlík J., Chráska T., Stráský J., Janeček M.: High-throughput characterization of elastic moduli of Ti-Nb-Zr-O biomedical alloys fabricated by field-assisted sintering technique. Journal of Alloys and Compounds 932 [January] (2023) č. článku 167656. [ Abstract ] [ Link ]
	Veverka J., Vilémová M., Lukáč F., Kądzielawa A. P., Legut D., Vontorová J., Kozlík J., Chráska T.: Decreasing the W-Cr solid solution decomposition rate: Theory, modelling and experimental verification. Journal of Nuclear Materials 576 [May] (2023) č. článku 154288. [ Abstract ] [ Link ]
	Veverková A., Stráský J., Preisler D., Kozlík J., Chráska T., Lukáč F., Casas-Luna M., Janeček M.: Processing of Long Ti-15Mo Alloy Rods by Upscaling the Field-Assisted Sintering Technique. JOM 75 [12] (2023) 5847-5858. [ Abstract ] [ Link ]
	Preisler D., Knapek M., Harcuba P., Chráska T., Stráský J.: High-throughput evaluation of mechanical properties of biomedical Ti alloys by digital image correlation and acoustic emission. Materials Letters 351 [November] (2023) č. článku 135043. [ Abstract ] [ Link ]
	Kozlík J., Preisler D., Haasová M., Stráský J., Chráska T., Janeček M.: Mechanical Properties of Ti–5Al–5V–5Mo–3Cr Alloy Sintered From Blended Elemental Powders. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 54 [7] (2023) 2703-2714. E. [ Abstract ] [ Link ]
2022	Kovařík O., Čížek J., Yin S., Lupoi R., Janovská M., Čech J., Čapek J., Siegl J., Chráska T.: Mechanical and Fatigue Properties of Diamond-Reinforced Cu and Al Metal Matrix Composites Prepared by Cold Spray. Journal of Thermal Spray Technology 31 [1-2] (2022) 217-233. [ Abstract ] [ Link ]
	Csáki Š., Lukáč F., Veverka J., Chráska T.: Preparation of Ti3SiC2 MAX phase from Ti, TiC, and SiC by SPS. Ceramics International 48 [19] (2022) 28391-28395. [ Abstract ] [ Link ]
	Tkachenko S., Brodnikovskyi D., Čížek J., Komarov P., Brodnikovskyi Y., Tymoshenko Y., Csáki Š., Pinchuk M., Vasylyev O., Čelko L., Gadzyra M., Chráska T.: Novel Ti–Si–C composites for SOFC interconnect materials: Production optimization. Ceramics International 48 [19] (2022) 27785-27798. [ Abstract ] [ Link ]
	Kozlík J., Preisler D., Stráský J., Kosutová T., Correa C.A., Veselý J., Bodnárová L., Lukáč F., Chráska T., Janeček M.: Manufacturing of biomedical Ti alloys with controlled oxygen content by blended elemental powder metallurgy. Journal of Alloys and Compounds 905 [June] (2022) č. článku 164259. [ Abstract ] [ Link ]
2021	Veverka J., Lukáč F., Kądzielawa A. P., Koller M., Chlup Z., Hadraba H., Karlík M., Legut D., Vontorová J., Chráska T., Vilémová M.: Ultrafine-grained W-Cr composite prepared by controlled W-Cr solid solution decomposition. Materials Letters 304 [December] (2021) č. článku 130728. [ Abstract ] [ Link ]
	Samal S., Tyc O., Čížek J., Klečka J., Lukáč F., Molnárová O., de Prado E., Weiss Z., Kopeček J., Heller L., Šittner P., Chráska T.: Fabrication of thermal plasma sprayed NiTi coatings possessing functional properties. Coatings 11 [5] (2021) 1-16, č. článku 610. E. [ Abstract ] [ Link ]
	Veverková A., Kozlík J., Bartha K., Košutová T., Correa C., Becker H., Chráska T., Janeček M., Stráský J.: Preparation of bulk Ti-15Mo alloy using cryogenic milling and spark plasma sintering. Materials Characterization 171 [January] (2021) č. článku 110762. [ Abstract ] [ Link ]
	Kozlík J., Preisler D., Stráský J., Veselý J., Veverková A., Chráska T., Janeček M.: Phase transformations in a heterogeneous Ti-xNb-7Zr-0.8O alloy prepared by a field-assisted sintering technique. Materials and Design 198 [January] (2021) č. článku 109308. [ Abstract ] [ Link ]
	Kozlík J., Veselý J., Stráský J., Chráska T., Janeček M.: Interface of a al6061/ti composite prepared by field assisted sintering technique. Metals 11 [1] (2021) 1-12, č. článku 73. E. [ Abstract ] [ Link ]
	Tesař T., Mušálek R., Medřický J., Dudík J., Čížek J., Lukáč F., Chráska T.: Hybrid Plasma Spraying —Discovering the Effects of Deposition Parameters. Thermal Spray 2021: Proceedings from the International Thermal Spray Conference. Materials Park: ASM International, 2021, s. 493-498. ISBN 9781713831303. [ Abstract ] [ Link ] [International Thermal Spray Conference 2021. online (CZ), 24.05.2021-28.05.2021]
	Lukáč F., Vilémová M., Klementová M., Minárik P., Chráska T.: The origin and the effect of the fcc phase in sintered HfNbTaTiZr. Materials Letters 286 [March] (2021) č. článku 129224. [ Abstract ] [ Link ]
	Klečka J., Čížek J., Matějíček J., Lukáč F., Zlatník R., Chráska T.: Tailoring the structure of RF-ICP tungsten coatings. Surface and Coatings Technology 406 [January] (2021) č. článku 126745. [ Abstract ] [ Link ]
	Čížek J., Dukovský D., Mušálek R., Medřický J., Tesař T., Lukáč F., Chráska T.: Suspension Spraying Tip: High Molecular Weight Solvent. Journal of Thermal Spray Technology 30 [5] (2021) 1148-1158. [ Abstract ] [ Link ]
	Samal S., Tyc O., Čížek J., Klečka J., Lukáč F., Molnárová O., de Prado E., Wiess Z., Kopeček J., Heller L., Šittner P., Chráska T.: Fabrication of Thermal Plasma Sprayed NiTi Coatings Possessing Functional Properties. Coatings 11 [5] (2021) 1-16, č. článku 610. [ Abstract ] [ Link ]
	Veverka J., Vilémová M., Chlup Z., Hadraba H., Lukáč F., Csáki Š., Matějíček J., Vontorová J., Chráska T.: Evolution of carbon and oxygen concentration in tungsten prepared by field assisted sintering and its effect on ductility. International Journal of Refractory Metals & Hard Materials 97 [June] (2021) č. článku 105499. [ Abstract ] [ Link ]
	Kovařík O., Čížek J., Klečka J., Karlík M., Čapek J., Siegl J., Chráska T., Takayasu S.: Mechanical properties and fatigue crack growth in tungsten deposited by RF-plasma. Surface and Coatings Technology 410 [March] (2021) č. článku 126930. [ Abstract ] [ Link ]
2020	Vilémová M., Hadraba H., Weiss Z., Lukáč F., Csáki Š., Chlup Z., Matějíček J., Chráska T.: Phase, composition and structure changes of CoCrNi-based concentrated alloys resulting from high temperature oxidation. Materials 13 [10] (2020) č. článku 2276. [ Abstract ] [ Link ]
	Kovarik O., Siegl J., Čížek J., Chráska T., Kondás J.: Fracture Toughness of Cold Sprayed Pure Metals. Journal of Thermal Spray Technology 29 [1-2] (2020) 147-157. [ Abstract ] [ Link ]
	Hulka I., Utu D., Serban V. A., Negrea P., Lukáč F., Chráska T.: Effect of Ti addition on microstructure and corrosion properties of laser cladded WC-Co/NiCrBSi(Ti) coatings. Applied Surface Science 504 [February] (2020) č. článku 144349. [ Abstract ] [ Link ]
	Matějíček J., Klečka J., Čížek J., Veverka J., Vilémová M., Chráska T., Ganesh V.: Tungsten-steel and tungsten-chromium composites prepared by RF plasma spraying. Proceedings 29th International Conference on Metallurgy and Materials. Ostrava: Tanger, 2020, s. 756-763. ISBN 978-80-87294-97-0. [ Abstract ] [ Link ] [29th International Conference on Metallurgy and Materials. Brno (CZ), 20.05.2020-22.05.2020]
	Hulka I., Mušálek R., Lukáč F., Klečka J., Chráska T.: Microstructure and microhardness evaluation fornicraly materials manufactured by spark plasmasintering and plasma spraying. Acta polytechnica 27 (2020) 13-17. [ Abstract ] [ Link ]
	Mušálek R., Tesař T., Medřický J., Lukáč F., Chráska T., Gupta M.: Microstructures and Thermal Cycling Properties of Thermal Barrier Coatings Deposited by Hybrid Water-Stabilized Plasma Torch. Journal of Thermal Spray Technology 29 [3] (2020) 444-461. [ Abstract ] [ Link ]
2019	Veverková A., Kozlík J., Bartha K., Chráska T., Correa C. B., Stráský J.: Mechanical properties of Ti-15Mo alloy prepared by cryogenic milling and spark plasma sintering. Metals 9 [12] (2019) č. článku 1280. [ Abstract ] [ Link ]
	Tesař T., Mušálek R., Lukáč F., Medřický J., Čížek J., Rimal V., Joshi S., Chráska T.: Increasing ?-phase content of alumina-chromia coatings deposited by suspension plasma spraying using hybrid and intermixed concepts. Surface and Coatings Technology 371 [15 August 2019] (2019) 298-311. [ Abstract ] [ Link ]
	Čížek J., Kovářík O., Šiška F., Bensch J., Čupera J., Matějková M., Siegl J., Chráska T., Khor K.A.: Increasing Fatigue Endurance of Hydroxyapatite and Rutile Plasma Sprayed Biocomponents by Controlling Deposition In-Flight Properties. ACS BIOMATERIALS SCIENCE & ENGINEERING 5 [4] (2019) 1703-1714. [ Abstract ] [ Link ]
	Hulka I., Mušálek R., Lukáč F., Klečka J., Chráska T.: Microstructure and microhardness evaluation for NiCrAlY materials manufactured by spark plasma sintering and plasma spraying. Acta Polytechnica CTU Proceedings. Vol. 27. Prague: Czech Technical University in Prague, 2020, Roč. 27 (2020), s. 13-17. ISBN 978-80-01-06735-2. ISSN 2336-5382. [ Abstract ] [ Link ] [14th International Conference on Local Mechanical Properties. Praha (CZ), 06.11.2019-08.11.2019]
	Medřický J., Lukáč F., Csáki Š., Houdková Š., Barbosa M., Tesař T., Čížek J., Mušálek R., Kovařík O., Chráska T.: Improvement of Mechanical Properties of Plasma Sprayed Al2O3–ZrO2–SiO2 Amorphous Coatings by Surface Crystallization. Materials 12 [19] (2019) č. článku 3232. [ Abstract ] [ Link ]
2018	Molnárová O., Málek P., Veselý J., Minárik P., Lukáč F., Chráska T., Novák P., Průša F.: The influence of milling and spark plasma sintering on the microstructure and properties of the Al7075 alloy. Materials 11 [4] (2018) č. článku 547. [ Abstract ] [ Link ]
	Terynková A., Kozlík J., Bartha K., Chráska T., Dlabáček Z., Stráský J.: The effect of spark plasma sintering on the porosity and mechanical properties of Ti-15Mo alloy. Metal 2018 - 27th International conference on metallurgy and materials, Conference Proceedings. Ostrava: TANGER Ltd, 2018, (2018), s. 1765-1770, č. článku 142841. ISBN 978-80-87294-84-0. [ Abstract ] [27th International Conference on Metallurgy and Materials. Brno (CZ), 23.05.2018-25.05.2018]
	Kozlík J., Harcuba P., Stráský J., Chráska T., Janeček M.: Microstructure of commercially pure titanium after cryogenic milling and spark Plasma sintering. Metal 2018 - 27th International conference on metallurgy and materials, Conference Proceedings. Ostrava: TANGER Ltd, 2018, (2018), s. 1298-1303, č. článku 142841. ISBN 978-80-87294-84-0. [ Abstract ] [27th International Conference on Metallurgy and Materials. Brno (CZ), 23.05.2018-25.05.2018]
	Molnárová O., Málek P., Veselý J., Lukáč F., Chráska T., Cinert J.: High Temperature Stability of an Al–Zr–Ti Alloy Prepared using Gas Atomization and Spark Plasma Sintering Technology. ACTA PHYSICA POLONICA A 134 [3] (2018) 876-880. E. [ Abstract ] [ Link ]
	Kopeček J., Bartha K., Mušálek R., Pala Z., Chráska T., Beran P., Ryukhtin V., Strunz P., Nováková J., Stráský J., Novák P., Heczko O., Landa M., Seiner H., Janeček M.: Structural characterization of semi-heusler/light metal composites prepared by spark plasma sintering. Scientific Reports 8 [Jul] (2018) 1-13, č. článku 11133. [ Abstract ] [ Link ]
	Pejchal V., Fornabaio M., Zagar G., Riesen G., Martin R.G., Medřický J., Chráska T., Mortensen A.: Meridian crack test strength of plasma-sprayed amorphous and nanocrystalline ceramic microparticles. Acta Materialia 145 [February] (2018) 278-289. [ Abstract ] [ Link ]
	Kozlík J., Stráský J., Harcuba P., Ibragimov I., Chráska T., Janeček M.: Cryogenic Milling of Titanium Powder. Metals 8 [1] (2018) č. článku 31. [ Abstract ] [ Link ]
	Tesař T., Mušálek R., Medřický J., Čížek J., Lukáč F., Chráska T.: Deposition of Multiphase Coatings from Liquid Feedstock using Hybrid Water Stabilized (WSP H) Plasma Torch. ITSC 2018 Conference Proceedings. Orlando: ASM International, 2018, s. 456-462. ISBN 978-1-62708-160-3. [ Abstract ] [International Thermal Spray Conference. Orlando (US), 07.05.2018-10.05.2018]
	Terynková A., Kozlík J., Bartha K., Chráska T., Stráský J.: Ultra-Fine Grained Ti-15Mo Alloy Prepared by Powder Metallurgy. Materials Science Forum. In: THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS. 2018 - (Shabadi, R.; Ionescu, M.; Jeandin, M.; Richard, C.; Chandra, T.), Roč. 941 (2018), s. 1276-1281, č. článku UNSP 108052A. ISBN 978-3-0357-1208-7. ISSN 0255-5476. [ Abstract ] [ Link ] [10th International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications. Paříž (FR), 09.07.2018-13.07.2018]
	Šulák I., Obrtlík K., Čelko L., Chráska T., Jech D., Gejdoš P.: Low cycle fatigue performance of Ni-based superalloy coated with complex thermal barrier coating. Materials Characterization 139 [MAY] (2018) 347-354. [ Abstract ] [ Link ]
	Šíma V., Minárik P., Cieslar M., Král R., Málek P., Chráska T., Lukáč F., Seiner H., Průša F.: High plasticity of an iron aluminide-based material at low temperatures. Physical Science International Journal 18 [2] (2018) č. článku PSIJ.41673. [ Abstract ] [ Link ]
	Lukáč F., Dudr M., Mušálek R., Klečka J., Cinert J., Čížek J., Chráska T., Čížek J., Melikhova O., Kuriplach J., Zyka J., Málek J.: Spark plasma sintering of gas atomized high-entropy alloy HfNbTaTiZr. Journal of Materials Research 33 [19] (2018) 3247-3257. [ Abstract ] [ Link ]
	Čížek J., Brožek V., Chráska T., Lukáč F., Medřický J., Mušálek R., Tesař T., Šiška F., Antos Z., Čupera J., Matejková M., Spotz Z., Houdková Š., Kverka M.: Silver-doped hydroxyapatite coatings deposited by suspension plasma spraying. Journal of Thermal Spray Technology 27 [8] (2018) 1333-1343. [ Abstract ] [ Link ]
	Tkachenko S., Čížek J., Mušálek R., Dvořák K., Spotz Z., Montufar E. B., Chráska T., Krupka I., Čelko L.: Metal matrix to ceramic matrix transition via feedstock processing of SPS titanium composites alloyed with high silicone content. Journal of Alloys and Compounds 764 (2018) 776-788. [ Abstract ] [ Link ]
	Medřický J., Mušálek R., Janata M., Chráska T., Lukáč F.: Cost effective plasma spraying for large-scale applications. ITSC 2018 Conference Proceedings. Orlando: ASM International, 2018, s. 683-689. ISBN 978-1-62708-160-3. [ Abstract ] [International Thermal Spray Conference. Orlando (US), 07.05.2018-10.05.2018]
2017	Koller M., Chráska T., Cinert J., Heczko O., Kopeček J., Landa M., Mušálek R., Rameš M., Seiner H., Stráský J., Janeček M.: Mechanical and magnetic properties of semi-Heusler/light-metal composites consolidated by spark plasma sintering. Materials and Design 126 [July] (2017) 351-357. [ Abstract ] [ Link ]
	Kubatík T., Lukáč F., Mušálek R., Brožek V., Stehlíková K., Chráska T.: Compaction of lithium-silicate ceramics using spark plasma sintering. Ceramics - Silikáty 61 [1] (2017) 40-44. [ Abstract ] [ Link ]
	Mušálek R., Medřický J., Tesař T., Kotlan J., Pala Z., Lukáč F., Chráska T., Curry N.: Suspensions Plasma Spraying of Ceramics with Hybrid Water-Stabilized Plasma Technology. Journal of Thermal Spray Technology 26 [1-2] (2017) 37-46. [ Abstract ] [ Link ] [ISTC 2016: International Thermal Spray Conference. Shanghai, 10.05.2016-12.05.2016]
	Lukáč F., Vilémová M., Nevrlá B., Klečka J., Chráska T., Molnárová O.: Properties of Mechanically Alloyed W-Ti Materials with Dual Phase Particle Dispersion. Metals 7 [1] (2017) č. článku 3. [ Abstract ] [ Link ]
	Málek P., Molnárová O., Cinert J., Lukáč F., Chráska T.: Processing of bulk Al7075 alloy by spark plasma sintering. IOP Conference Series: Materials Science and Engineering. Vol. 179. Bristol: Institute of Physics Publishing ( IOP ), 2017 - (Dzugan, J.), č. článku 012050. IOP Conference Series. ISSN 1757-8981. [ Abstract ] [ Link ] [International Conference Recent Trends in Structural Materials (COMAT)/4./. Pilsen (CZ), 09.11.2016-11.11.2016]
	Tesař T., Mušálek R., Medřický J., Kotlan J., Lukáč F., Pala Z., Ctibor P., Chráska T., Houdková Š., Rimal V., Curry N.: Development of suspension plasma sprayed alumina coatings with high enthalpy plasma torch. Surface and Coatings Technology 325 [September] (2017) 277-288. [ Abstract ] [ Link ]
	Mušálek R., Medřický J., Kotlan J., Tesař T., Lukáč F., Ctibor P., Illkova K., Chráska T.: High Feed Rate Plasma Spraying of YSZ from Various Suspensions. ITSC 2017 - Proceedings of the International Thermal Spray Conference. Düsseldorf: DVS Media GmbH, 2017, s. 36-41. ITSC. ISBN 978-3-96144-000-9. [ Abstract ] [ITSC 2017: International Thermal Spray Conference and Exposition. Düsseldorf (DE), 07.06.2017-09.06.2017]
	Mušálek R., Medřický J., Tesař T., Kotlan J., Pala Z., Lukáč F., Illková K., Hlína M., Chráska T., Sokołowski P., Curry N.: Controlling Microstructure of Yttria-Stabilized Zirconia Prepared from Suspensions and Solutions by Plasma Spraying with High Feed Rates. Journal of Thermal Spray Technology 26 [8] (2017) 1787-1803. [ Abstract ] [ Link ]
	Lukáč F., Chráska T., Molnárová O., Málek P., Cinert J.: Effect of cryogenic milling on Al7075 prepared by spark plasma sintering method. Powder Diffraction 32 [S1] (2017) S221-S224. [ Abstract ] [ Link ] [European Powder Diffraction Conference (EPDIC) /15./. Bari, 12.06.2016-15.06.2016]
	Ďuran I., Entler S., Kočan M., Kohout M., Viererbl L., Mušálek R., Chráska T., Vayakis G.: Development of Bismuth Hall sensors for ITER steady state magnetic diagnostics. Fusion Engineering and Design 123 [November] (2017) 690-694. [ Abstract ] [ Link ] [SOFT 2016: Symposium on Fusion Technology /29./. Prague, 05.09.2016-09.09.2016]
	Molnárová O., Málek P., Veselý J., Šlapáková M., Minárik P., Lukáč F., Chráska T., Novák P., Průša F.: Nanocrystalline Al7075+1 wt % Zr Alloy Prepared Using Mechanical Milling and Spark Plasma Sintering. Materials 10 [9] (2017) č. článku 1105. [ Abstract ] [ Link ]
	Obrtlík K., Čelko L., Chráska T., Šulák I., Gejdoš P.: Effect of alumina-silica-zirconia eutectic ceramic thermal barrier coating on the low cycle fatigue behaviour of cast polycrystalline nickel-based superalloy at 900 °C. Surface and Coatings Technology 318 [MAY] (2017) 374-381. [ Abstract ] [ Link ] [RIPT - International Meeting on Thermal Spraying /7./. Limoges, 09.12.2015-12.12.2015]
	Lukáč F., Chráska T., Molnárová O., Málek P., Cinert J.: Effect of cryogenic milling on Al7075 prepared by spark plasma sintering method. Powder Diffraction 32 [S1] (2017) S221-S224. [ Abstract ] [ Link ] [European Powder Diffraction Conference (EPDIC) /15./. Bari, 12.06.2016-15.06.2016]
2016	Molnárová O., Málek P., Nemeth G., Kozlík J., Lukáč F., Chráska T., Cinert J.: THE INVESTIGATION OF AN Al7075 ALLOY PREPARED BY SPARK PLASMA SINTERING OF MILLED POWDERS. METAL 2016 – Conference proceedings: 25th Anniversary International Conference on Metallurgy and Materials. Ostrava: TANGER Ltd., Ostrava, 2016, s. 1200-1205. METAL. ISBN 978-80-87294-67-3. [ Abstract ] [METAL 2016 - 25th Anniversary International Conference on Metallurgy and Materials/25./. Brno (CZ), 25.05.2016-27.05.2016]
	Mušálek R., Medřický J., Kotlan J., Tesař T., Pala Z., Lukáč F., Chráska T.: Plasma Spraying of Suspensions with Hybrid Water-Stabilized Plasma Technology. ITSC 2016 - Proceedings of the International Thermal Spray Conference. Düsseldorf: DVS Media GmbH, 2016, s. 267-272. ITSC, 2016. ISBN 978-3-87155-574-9. [ Abstract ] [ITSC 2016: International Thermal Spray Conference and Exposition. Shanghai (CN), 10.05.2016-12.05.2016]
	Molnárová O., Málek P., Lukáč F., Chráska T.: Spark Plasma Sintering of a Gas Atomized Al7075 Alloy: Microstructure and Properties. Materials 9 [12] (2016) č. článku 1004. [ Abstract ] [ Link ]
2015	De Temmerman G., Morgan T.W., van Eden G.G., de Kruif T., Wirtz M., Matějíček J., Chráska T., Pitts R.A., Wright G.M.: Effect of high-flux H/He plasma exposure on tungsten damage due to transient heat loads. Journal of Nuclear Materials 463 [August] (2015) 198-201. [ Abstract ] [ Link ] [PLASMA-SURFACE INTERACTIONS 21: International Conference on Plasma-Surface Interactions in Controlled Fusion Devices. Kanazawa, 26.05.2014-30.05.2014]
	Chráska T., Pala Z., Mušálek R., Medřický J., Vilémová M.: Post-treatment of Plasma-Sprayed Amorphous Ceramic Coatings by Spark Plasma Sintering. Journal of Thermal Spray Technology 24 [4] (2015) 637-643. [ Abstract ] [ Link ]
	Kovářík O., Haušild P., Siegl J., Chráska T., Matějíček J., Pala Z., Boulos M.: The influence of substrate temperature on properties of APS and VPS W coatings. Surface and Coatings Technology 268 [April] (2015) 7-14. [ Abstract ] [ Link ]
	Medřický J., Curry N., Pala Z., Vilémová M., Chráska T., Johansson J., Markocsan N.: Optimization of High Porosity Thermal Barrier Coatings Generated with a Porosity Former. Journal of Thermal Spray Technology 24 [4] (2015) 622-628. [ Abstract ] [ Link ]
	Hlína M., Hrabovský M., Kopecký V., Mašláni A., Chráska T.: Plasma decomposition of pyrolysis oil to synthesis gas and carbon black. ISPC 22 - 22nd International Symposium on Plasma Chemistry. Antwerp : International Plasma Chemistry Society, 2015, P-III-9-15-P-III-9-15. ISBN N. [ Abstract ] [ Link ] [ISPC 22 - 22nd International Symposium on Plasma Chemistry/22./. Antwerp (BE), 05.07.2015-10.07.2015]
	Matějíček J., Boldyryeva H., Brožek V., Sachr P., Chráska T., Pala Z.: W–steel and W–WC–steel composites and FGMs produced by hot pressing. Fusion Engineering and Design 100 [November] (2015) 364-370. [ Abstract ] [ Link ]
	Brožek V., Kubatík T., Chráska T., Mušálek R., Janata M., Mastný L.: Chemical aspects of antiballistic cermets preparation. Proceedings of the 3rd International Conference on Chemical Technology, ICCT 2015. Prague : Czech Society of Industrial Chemistry, 2015 - (Kalenda, P.; Lubojacký, J.), s. 218-224 ISBN 978-80-86238-79-1. - (ICCT). [ Abstract ] [ Link ] [International Conference on Chemical Technology-ICCT2015/3./. Mikulov (CZ), 13.04.2015-15.04.2015]
	Kubatík T., Pala Z., Neufuss K., Vilémová M., Mušálek R., Stoulil J., Slepička P., Chráska T.: Metallurgical bond between magnesium AZ91 alloy and aluminium plasma sprayed coatings. Surface and Coatings Technology 282 [November] (2015) 163-170. [ Abstract ] [ Link ]
2014	van Eden G.G., Morgan T.W., van der Meiden H.J., Matějíček J., Chráska T., Wirtz M., De Temmerman G.: The effect of high-flux H plasma exposure with simultaneous transient heat loads on tungsten surface damage and power handling. Nuclear Fusion 54 [12] (2014) 123010-123010. [ Abstract ] [ Link ]
	Morgan T.W., van Eden G.G., de Kruif T.M., van den Berg A., Matějíček J., Chráska T., De Temmerman G.: ELM-induced melting: assessment of shallow melt layer damage and the power handling capability of tungsten in a linear plasma device. Scripta. - [T159] (2014) 014022-014022. [ Abstract ] [ Link ] [International Conference on Plasma-Facing Materials and Components for Fusion Applications/14./. Jülich, 13.05.2013-17.05.2013]
	Chráska T., Medřický J., Mušálek R., Vilémová M., Pala Z., Cinert J.: Post-treatment of plasma sprayed amorphous ceramic coatings by spark plasma sintering. ITSC 2014 :Interational Thermal Spray Conference and Exposition, Abstracts (including manuscripts on CD-ROM). Düsseldorf : DVS Media GmbH, 2014, s. 617-622. ISBN 978-3-87155-574-9. - (DVS-Berichte. 302). [ Abstract ] [ Link ] [ITSC 2014 :Interational Thermal Spray Conference and Exposition. Barcelona (ES), 21.05.2014-23.05.2014]
	Horník J., Tondl D., Sachr P., Anisimov E., Puchnin M., Chráska T.: The Effect of PVD Tungsten-Based Coatings on Improvement of Hardness and Wear Resistance. Key Engineering Materials. Vol. 606. Durnten-Zurich : Trans Tech Publications, 2014 - (Haušild, P.), s. 163-166 ISBN 978-3-03835-062-0. ISSN 1013-9826. [ Abstract ] [ Link ] [International Conference on Local Mechanical Properties, LMP 2013/10./. Kutná Hora (CZ), 06.11.2013-08.11.2013]
	Kubatík T., Chráska T., Pala Z., Vilémová M., Mušálek R., Kotlan J., Brožek V., Dubský J.: SiC-Ti composites fabricated by pulsed electric current sintering. Proceedings of the Euro PM2014 Congress. Salzburg : European Powder Metallurgy Association, 2014. ISBN 978-1-899072-45-3. [ Abstract ] [ Link ] [Euro powder metallurgy 2014 Congress and Exhibition. Salzburg (AT), 21.09.2014-24.09.2014]
	Medřický J., Vilémová M., Chráska T., Curry N., Markocsan N.: Optimization of High Porosity Thermal Barrier Coatings Generated with a Porosity Former. ITSC 2014 :Interational Thermal Spray Conference and Exposition, Abstracts (including manuscripts on CD-ROM). Düsseldorf : DVS Media GmbH, 2014, s. 680-685. ISBN 978-3-87155-574-9. - (DVS-Berichte. 302). [ Abstract ] [ITSC 2014 :Interational Thermal Spray Conference and Exposition. Barcelona (ES), 21.05.2014-23.05.2014]
	Chráska T., Hrabovský M., Glanc A., Mušálek R., Medřický J.: Properties of Novel Hybrid Water-Gas DC Arc Plasma Torch. Electronic Proceedings of ETSA workshop 2014: Coatings for high temperature applications. Plzeň : University of West Bohemia, 2014 - (Houdková, Š.; Křenek, T.) ISBN 978-80-261-0433-9. [ Abstract ] [ Link ] [Workshop on thermal spray and laser clad coatings: Coatings for high temperaure applications. Plzeň (CZ), 14.10.2014-15.10.2014]
	Dubský J., Chráska T., Pala Z., Nevrlá B., Chráska P.: Plasma Spraying of Silica-Rich Calcined Clay Shale. Journal of Thermal Spray Technology 23 [4] (2014) 732-741. [ Abstract ] [ Link ]
2013	Šíma V., Cieslar M., Çelikyürek I., Torun O., Chráska T.: Fully Dense Fine Grained FeAl-based Intermetallics Prepared by Spark Plasma Sintering Method. Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing (PRICM8). Hoboken, New Yersey : John Wiley & Sons, Inc,,TMS, 2013 - (Marquis, F.), s. 361-368 ISBN 978-0-470-94309-0. [ Abstract ] [ Link ] [PRICM: 8 Pacific Rim International Congress on Advanced Materials and Processing/8./. Hilton Waikoloa Village, Waikoloa, Hawaii (US), 04.08.2013-09.08.2013]
	Mušálek R., Dlabáček Z., Vilémová M., Pala Z., Matějíček J., Chráska T.: Preparation of multiphase materials with spark plasma sintering. METAL 2013 Conference Proceedings: 22nd International Conference on Metallurgy and Materials. Ostrava : Tanger spol. s r.o, 2013, s. 1625-1625. ISBN 978-80-87294-39-0. [ Abstract ] [ Link ] [METAL 2013: International Conference on Metallurgy and Materials/22./. Brno (CZ), 15.05.2013-17.05.2013]
	Mušálek R., Glanc A., Medřický J., Pala Z., Chumak O., Janata M., Chráska T.: Studie opakovatelnosti depozice plazmových nástřiků pomocí technologie WSP. Zborník prednášok Vrstvy a povlaky 2013. Trenčín : LISS a.s, 2013 - (Šošovičková, J.), s. 109-114 ISBN 978-80-970824-2-0. [ EN ] [ Abstract ] [Vrstvy a povlaky 2013. Rožnov pod Radhoštěm (CZ), 30.09.2013-01.10.2013]
	Chráska T.: Způsob přípravy gradovaného keramického povlaku a gradovaný keramický povlak připravený tímto způsobem. 2013. Vlastník: Ústav fyziky plazmatu AV ČR, v.v.i. Datum udělení patentu: 09.10.2013. Číslo patentu: 304146 [ EN ] [ Abstract ] [ Link ]
2012	Bertolissi G., Mušálek R., Brožek V., Chráska T.: Experiments on implementation of liquid precursor plasma spray technology on WSP® torch. Vrstvy a povlaky 2012. Trenčín : LISS a.s, 2012 - (Šošovičková, J.), s. 7-12 ISBN 978-80-970824-1-3. [ Abstract ] [ Link ] [Vrstvy a Povlaky 2012. Rožnov pod Radhoštěm (CZ), 08.10.2012-09.10.2012]
	Bertolissi G., Brožek V., Chráska T., Mušálek R., Neufuss K., Mastný L., Sofer Z.: Production of nanoparticles utilizing water stabilized plasma. NANOCON 2012 - Conference Proceedings. Ostrava : Tanger, 2012, s. 33-38. ISBN 978-80-87294-32-1. [ Abstract ] [ Link ] [NANOCON 2012. International Conference /4./. Brno (CZ), 23.10.2012-25.10.2012]
2011	Brožek V., Chráska T., Mušálek R., Neufuss K.: Chemické aspekty přípravy protibalistické kovokeramiky plazmovou depozicí. APROCHEM 2011 Sborník přednášek. Praha : PCHE – PetroChemEng, 2011. S. 577-584. ISBN 978-80-02-02311-1. [ EN ] [Chemicko-technologická konference s mezinárodní účastí APROCHEM 2011/20./. Kouty nad Desnou (CZ), 11.04.2011-13.04.2011]
2010	Chráska P., Chráska T.: Thermally Sprayed Functionally Graded Materials(DOI: 10.1002/9781118144442.ch10). Processing and Properties of Advanced Ceramics and Composites. Hoboken, NJ : American Ceramic Society, 2011 - (Bansal, N.; Singh, J.; Lamon, J.; Choi, S.) S. 109-122. ISBN 978-1-1180-5998-2. - (Ceramic Transactions. 3. 225). [ Link ] [Materials Science & Technology (MS&T’10). Houston, TX (US), 17.10.2010-21.10.2010]
	Voleník K., Schneeweiss O., Chráska T., Kolman B., Chráska P.: Composition changes of cast iron particles due to reactions in a plasma stream. World PM2010 Proceedings: Powder Manufacturing and Processing; Miniaturization and Nanotechnology; Powder Pressing. Shrewsbury : European Powder Metallurgy Association, 2010. S. 143-150. ISBN 978-1899072101. [ Abstract ] [Powder Metallurgy World Congress & Exhibition – PM2010. Florencie (IT), 10.10.2010-14.10.2010]
2009	Chráska T., Hostomský J., Klementová M., Dubský J.: Crystallization kinetics of amorphous alumina zirconia silica ceramics. Microscopy and Microanalysis 15 [S2] (2009) 1000-1001. [ Abstract ]
	Chráska T., Hostomský J., Klementová M., Dubský J.: Crystallization kinetics of amorphous alumina–zirconia–silica ceramics. Journal of the European Ceramic Society 29 [15] (2009) 3159-3165. [ Abstract ] [ Link ]
	Chráska T., Neufuss K.: Nanokrystalický kompozitní materiál na bázi Al203 - ZrO2 - SiO2 a způsob jeho přípravy. Ústav fyziky plazmatu AV ČR, v.v.i., Praha 8, CZ, Ústav anorganické chemie AV ČR, v.v.i., Řež u Prahy, CZ, EUTIT, s.r.o., Mariánské Lázně, CZ. Datum podání přihlášky: 12.09.2007. Datum udělení patentu: 18.05.2009. CZ 300602 B6 [ EN ] [ Abstract ]
	Voleník K., Schneeweiss O., Chráska T., Dubský J., Písačka J.: Simultaneous oxidation and decarburization of cast iron powder during plasma spraying. Kovové materiály 47 [1] (2009) 19-24. [ Abstract ] [ Link ]
	Chráska T., Hostomský J., Klementová M., Kolman B.: Solid state crystallization of alumina-zirconia-silica nanocomposites. Proceedings of the 11th European Ceramics Society Conference. Cracow : European Ceramic Society and Polish Ceramic Society, 2010 - (Pędzich, Z.) S. 520-526. ISBN 978-83-60958-54-4. [ Abstract ] [Conference and Exhibition of the European Ceramics Society/11th./. Krakow (PL), 21.062009-25.06.2009]
2008	Oberste-Berghaus J., Legoux J.-G., Moreau C., Tarasi F., Chráska T.: Mechanical and Thermal Transport Properties of Suspension Thermal-Sprayed Alumina-Zirconia Composite Coatings. Journal of Thermal Spray Technology 17 [1] (2008) 91-104. [ Abstract ] [ Link ]
	Chráska T., Neufuss K., Dubský J., Ctibor P., Rohan P.: Fabrication of bulk nanocrystalline alumina-zirconia materials. Ceramics International 34 [5] (2008) 1229-1236. [ Abstract ] [ Link ]
	Chráska T., Neufuss K., Dubský J., Ctibor P., Klementová M.: Fabrication of Bulk Nanocrystalline Ceramic Materials. Journal of Thermal Spray Technology 17 [5-6] (2008) 872-877. [ Abstract ] [ Link ]
2007	Chráska T., Klementová M., Neufuss K., Dubský J., Ctibor P., Rohan P.: CHARACTERISTICS OF NANOCRYSTALLINE SiO2-Al2O3-ZrO2 CERAMICS WITH VARIABLE COMPOSITION PREPARED BY PLASMA SPRAYING. Acta Microscopica 16 [suppl.2] (2007) 137-138. [ Abstract ] [ Link ] [CIASEM 2007. Cusco, 23.09.2007-28.09.2007]
	Chráska T., Klementová M.: BULK NANOCRYSTALLINE ALUMINA-ZIRCONIA MATERIALS. Proceedings 8th multinational congress on microscopy. České Budějovice : Czechoslovak microscopy society, 2007 - (Nebesářová, J.; Hozák, P.) S. 141-142. ISBN 978-80-239-9397-4. [ Abstract ] [Multinational Congress on Microscopy (8MCM)/8th./. Prague (CZ), 17.06.2007-21.06.2007]
	Chráska T., Klementová M., Hostomský J.: Formation of nanocomposite alumina-zirconia-silica ceramics. Acta Technica CSAV 52 [4] (2007) 331-341. [ Abstract ]
2006	Chráska T.: Transmission electron microscopy of plasma sprayed ceramic deposits. Acta Technica CSAV 51 [4] (2006) 403-413. [ Abstract ]
	Chráska T., Neufuss K., Rohan P., Dubský J., Oberste-Berghaus J.: Bulk nanocrystalline alumina-zirconia materials prepared by plasma spraying. “Thermal Spray 2006: Science, Innovation, and Application,”. Seattle, USA : ASM International, Materials Park, OH, USA, 2006 - (Marple, B.; Moreau, C.) s. 186-187. ISBN 0-87170-809-4. [ Abstract ] [International Thermal Spray Conference, ITSC 2006. Seattle (US), 15.05.2006-18.05.2006]
2005	Oberste-Berghaus J., Bouaricha S., Legoux J.-G., Moreau C., Chráska T.: Suspension plasma spraying of nano-ceramics using an axial injection torch. Proceedings of International Thermal Spray Conference 2005. Düsseldorf : DVS-Verlag Düsseldorf, 2005 - (Lugschneider, E.) s. 1434-1440. ISBN 3-87155-793-5. [ Abstract ] [International Thermal Spray Conference, ITSC 2005. Basel (CH), 2.5.2005-4.5.2005]
	Berghaus-Oberste J., Chráska T., Neufuss K., Moreau Ch., Chráska P.: Thermal spraying of basalt for abrasion protective coatings using WSP, HVOF and APS. Proceedings of International Thermal Spray Conference 2005. Düsseldorf : DVS-Verlag, Dusseldorf, 2005 - (Lugscheider, E.) s. 1235-1240. ISBN 3-87155-793-5. [ Abstract ] [International Thermal Spray Conference, ITSC 2005. Basel (CH), 2.5.2005-4.5.2005]
	Chráska T., Neufuss K., Oberste-Berghaus J., Lamontagne M., Moreau Ch.: In-flight particle diagnostic of water stabilized plasma spray process. Proceedings of International Thermal Spray Conference 2005. Düsseldorf : DVS-Verlag, 2005 - (Lugscheider, E.) s. 1292-1397. ISBN 3-87155-793-5. [ Abstract ] [International Thermal Spray Conference, ITSC 2005. Basel (CH), 2.5.2005-4.5.2005]
	Chráska T., Neufuss K., Dubský J., Nohava J.: NOVEL CERAMIC MATERIAL WITH AMORPHOUS AND NANOCRYSTALLINE MICROSTRUCTURE. Proceedings. Ljubljana, 2005 - (Čeh, M.; Dražič, G.; Fidler, S.) s. 167-168. ISBN 961-6303-69-4. [ Abstract ] [Multinational Congress on Microscopy (7MCM)/7th./. Portorož (SI), 26.06.2005-30.06.2005]
	Chráska T., Neufuss K., Rohan P., Dubský J.: Bulk nanocrystalline ceramic material prepared by plasma spraying. NANO´05. Brno, 2005 - (Šandera, P.) s. 201-206. ISBN 80-214-3085-0. [ Abstract ] [NANO ’05 - NENAMAT International Conference. Brno (CZ), 08.11.2005-10.11.2005]
	Chráska T., Neufuss K., Dubský J., Nohava J., Oberste-Berghaus J.: Plasma spraying of a novel material with amorphous and nanocrystalline microstructure. Thermal Spray connects: Explore its surfacing potential!. Düsseldorf : DVS-Verlag, Düsseldorf, 2005 - (Lugscheider, J.) s. 830-835. [ Abstract ] [International Thermal Spray Conference, ITSC 2005. Basel (CH), 2.5.2005-4.5.2005]
2004	Chráska T., Neufuss K., Nohava J., Dubský J.: Plasma Spraying of Alumina and Zirconia Nanoceramics. Proceedings. Brno, 2004 - (Šandera, P.) s. 85-90. ISBN 80-214-2793-0. [ Abstract ] [Nano ’04 International Conference. Brno (CZ), 13.10.2004-15.10.2004]
2003	Chráska T.: Utilization of plasma spraying for production of nanocrystalline ceramic materials. International Conference Nano '03 Proceedings. Brno, 2003 - (Šandera, P.) s. 26-31. ISBN 80-214-2527-X. [ Abstract ] [International Conference NANO /03./. Brno (CZ), 21.10.2003-23.10.2003]
2002	Chraska T., King AH.: Effect of different substrate conditions upon interface with plasma sprayed zirconia - a TEM study. Surface and Coatings Technology 157 [2-3] (2002) 238-246 [ DOI ]
	Hull R., Chraska T., Liu Y., Longo D.: Microcontact printing: new mastering and transfer techniques for high throughput, resolution and depth of focus. Mater. Sci. Eng. C-Biomimetic and Supramolecular Systems 19 [1-2] (2002) 383-392 [ DOI ]
2001	Longo DM., Benson WE., Chraska T., Hull R.: Deep submicron microcontact printing on planar and curved substrates utilizing focused ion beam fabricated printheads. Applied Physics Letters 78 [7] (2001) 981-983 [ DOI ]
	Chraska T., King AH.: Transmission electron microscopy study of rapid solidification of plasma sprayed zirconia - part I. First splat solidification. Thin Solid Films 397 [1-2] (2001) 30-39 [ DOI ]
	Chraska T., King AH.: Transmission electron microscopy study of rapid solidification of plasma sprayed zirconia - part II. Interfaces and subsequent splat solidification. Thin Solid Films 397 [1-2] (2001) 40-48 [ DOI ]
	Cabral MJ., Lye WK., Bean JC., Reed ML., Chraska T., Mesarovic SD., Hull R., Phillips AB.: Induced crystallization as a nonlithographic pattern transfer technique for nanofabrication. J. Vacuum Science & Technology B 19 [6] (2001) 2793-2796 [ DOI ]
	Stach EA., Freeman T., Minor AM., Owen DK., Cumings J., Wall MA., Chraska T., Hull R., Morris JW., Zettl A., Dahmen U.: Development of a nanoindenter for in situ transmission electron microscopy. Microscopy and Microanalysis 7 [6] (2001) 507-517
2000	Chraska T., King AH., Berndt CC.: On the size-dependent phase transformation in nanoparticulate zirconia. Mater. Sci. Eng. A-Struct. Mater. 286 [1] (2000) 169-178 [ DOI ]
1999	Chraska T., King AH.: Interfaces in rapidly solidified zirconia-yttria. Materials Science Forum 294-2 (1999) 779-782
	Chraska T., King AH.: Growth of columnar grains during zirconia-yttria splat solidification. J. of Materials Science Letters 18 [18] (1999) 1517-1519 [ DOI ]
1998	Chráska T., Lašek J., Chráska P.: Resistometric investigation of phase transformations in NiAl alloys. Materials Science and Engineering A-Structural materials 244 [-] (1998) 263-272.
1997	Lasek J., Chraska T., Krecek P., Bartuska P.: Phase transformations in nickel rich NiAl using electrical resistivity measurements. Scripta Materialia 37 [6] (1997) 897-902 [ DOI ]