[

Výzkumné projekty

2012-2014Žárový proces přípravy a vysokoteplotní strukturní stabilita nanokrystalických termálních bariér
Hlavní řešitel
Poskytovatel: Grantová agentura České republiky; ID projektu: GAP107/12/1922
2008-2010Fyzikální vlastnosti plazmaticky nanášených vysokotavitelných materiálů
Hlavní řešitel
Poskytovatel: Grantová agentura České republiky; ID projektu: GA106/08/1240
2005-2007Vliv struktury na mechanické vlastnosti termicky deponovaných materiálů
Hlavní řešitel
Poskytovatel: Grantová agentura České republiky; ID projektu: GA106/05/0483
2003-2005Změny složení keramických a kovových materiálů při jejich plazmovém stříkání
Spoluřešitel
Poskytovatel: Grantová agentura České republiky; ID projektu: GA106/03/0710
2001-2003Procesy porušování termicky nanášených materiálů
Hlavní řešitel
Poskytovatel: Grantová agentura České republiky; ID projektu: GA106/01/0094
2000-2001Nástřiky s nízkým Z pro fúzní reaktory
Spoluřešitel
Poskytovatel: Euratom v rámci EFDA (European Fusion Development Agreement); ID projektu: DV4/04(TW0)
1997-1999Vnitřní pnutí v plazmových nástřicích
Hlavní řešitel
Poskytovatel: Grantová agentura České republiky; ID projektu: GA106/97/0775

Seznam publikací

2014Kubatík T., Chráska T., Pala Z., Vilémová M., Mušálek R., Kotlan J., Brožek V., Dubský J.: SiC-Ti composites fabricated by pulsed electric current sintering. Proceedings of the Euro PM2014 Congress. Salzburg : European Powder Metallurgy Association, 2014. ISBN 978-1-899072-45-3.
[Euro powder metallurgy 2014 Congress and Exhibition. Salzburg (AT), 21.09.2014-24.09.2014]
[ Link ]
 
 Dubský J., Chráska T., Pala Z., Nevrlá B., Chráska P.: Plasma Spraying of Silica-Rich Calcined Clay Shale. Journal of Thermal Spray Technology 23 [4] (2014) 732-741.
[ Link ]
 
2011Dubský J., Chráska P., Kolman B., Stahr C.Ch., Berger L.-M.: Phase Formation Control in Plasma Sprayed Alumina–Chromia Coatings. Ceramics - Silikáty 55 [3] (2011) 294-300.
[ Link ]
 
2009Chráska T., Hostomský J., Klementová M., Dubský J.: Crystallization kinetics of amorphous alumina zirconia silica ceramics. Microscopy and Microanalysis 15 [S2] (2009) 1000-1001. [ CZ ] 
[ Anotace ]
 Chráska T., Hostomský J., Klementová M., Dubský J.: Crystallization kinetics of amorphous alumina–zirconia–silica ceramics. Journal of the European Ceramic Society 29 [15] (2009) 3159-3165. [ CZ ] 
[ Link ]
 
[ Anotace ]
 Voleník K., Schneeweiss O., Chráska T., Dubský J., Písačka J.: Simultaneous oxidation and decarburization of cast iron powder during plasma spraying. Kovové materiály 47 [1] (2009) 19-24. [ CZ ] 
[ Link ]
 
[ Anotace ]
2008Chráska T., Neufuss K., Dubský J., Ctibor P., Rohan P.: Fabrication of bulk nanocrystalline alumina-zirconia materials. Ceramics International 34 [5] (2008) 1229-1236. [ CZ ] 
[ Link ]
 
[ Anotace ]
 Chráska T., Neufuss K., Dubský J., Ctibor P., Klementová M.: Fabrication of Bulk Nanocrystalline Ceramic Materials. Journal of Thermal Spray Technology 17 [5-6] (2008) 872-877. [ CZ ] 
[ Link ]
 
[ Anotace ]
2007Chráska T., Klementová M., Neufuss K., Dubský J., Ctibor P., Rohan P.: CHARACTERISTICS OF NANOCRYSTALLINE SiO2-Al2O3-ZrO2 CERAMICS WITH VARIABLE COMPOSITION PREPARED BY PLASMA SPRAYING. Acta Microscopica 16 [suppl.2] (2007) 137-138.
[CIASEM 2007. Cusco, 23.09.2007-28.09.2007] [ CZ ] 
[ Link ]
 
[ Anotace ]
 Stahr C.Ch., Saaro S., Berger L.-M., Dubský J., Neufuss K.: About the Dependence of the Stabilization of ?-Alumina on the Spray Process. Thermal Spray 2007: Global Coating Solutions. Materials Park, Ohio : ASM International, 2007 - (Marple, B.; Hyland, M.; Lau, Y.; Li, C.; Lima, R.; Montavon, G.) S. 489-494. ISBN 978-0-87170-855-7.
[International Thermal Spray Conference 2007. Beijing (CN), 14.05.2007-17.05.2007] [ CZ ] 
[ Anotace ]
 Stahr C.Ch., Saaro S., Berger L.-M., Herrmann M., Dubský J., Neufuss K.: Dependence of the Stabilization of -Alumina on the Spray Process. Journal of Thermal Spray Technology 16 [5-6] (2007) 822-830. [ CZ ] 
[ Anotace ]
 Dubský J., Chráska P., Kolman B., Stahr C.Ch., Berger L.-M.: Formation of Corundum Phase in Plasma Sprayed Alumina Coatings. Thermal Processing and Surface Engineering: Key Activities in the Global Knowledge Economy. Brisbane : Materials Australia, 2007. S. 62-62.
[The 16th International Federation for Heat Treatment and Surface Engineering (IFHTSE) Congress/16th./. Brisbane (AU), 30.10.2007-1.11.2007] [ CZ ] 
[ Anotace ]
2006Siegl J., Kovářík O., Adámek J., Dubský J., Chráska P.: Evaluation of Fatique Properties of Various Thermal Spray Coatings. “Thermal Spray 2006: Science, Innovation, and Application,”. Seattle, USA : ASM International, Materials Park, OH, USA, 2006 - (Marple, B.; Moreau, C.) s12_23-11951. ISBN 0-87170-809-4.
[International Thermal Spray Conference (2006). Seattle, Washington, USA (US), 15.05.2006-18.05.2006] [ CZ ] 
[ Anotace ]
 Ctibor P., Neufuss K., Dubský J., Kolman B., Rohan P., Chráska P.: Spraying of agglomerated TiO2 nanopowder by water-stabilized plasma. Proceedings of International Thermal Spray Conference 2006. Ohio, USA : ASM International Materials Park OH 44073-0002, 2006. s9-11-11949.
[International Thermal Spray Conference 2006. Seattle, WA, USA (US), 15.05.2006-18.05.2006] [ CZ ] 
[ Anotace ]
 Stahr C.Ch., Saaro S., Berger L.-M., Dubský J., Neufuss K.: Über die Abhängigkeit der Stabilisierung von Korund vom Spritzprozess. „Verbundwerkstoffe und Werkstoffverbunde“, Tagungsband zum 9. Werkstofftechnischen Kolloquium. Chemnitz, Germany : Technische Universität Chemnitz, Germany, 2006 - (Wielage, B.) S. 226-235.
[Werkstofftechnischen Kolloquium „Verbunwerkstoffe und Werkstoffverbunde“/9./. Chemnitz (DE), 07.09.2006-08.09.2006] [ CZ ] 
[ Anotace ]
 Voleník K., Nop P., Kopřiva P., Kolman B., Dubský J.: Isothermal oxidation of metallic coatings deposited by a water-stabilized plasma gun. Kovové materiály 44 [1] (2006) 41-48. [ CZ ] 
[ Anotace ]
 Dubský J., Kolman B., Chráska P., Jančárek A.: Laser post-treatment of plasma sprayed Al2O3-Cr2O3 coatings. “Thermal Spray 2006: Science, Innovation, and Application,”. Seattle, USA : ASM International, Materials Park, OH, USA, 2006 - (Marple, B.; Moreau, C.) s15_7-11989. ISBN 0-87170-809-4.
[International Thermal Spray Conference (2006). Seattle, Washington, USA (US), 15.05.2006-18.05.2006] [ CZ ] 
[ Anotace ]
 Štraus J., Koláček K., Neufuss K., Kolman B., Dubský J., Frolov O., Schmidt J., Prukner V.: Modification of alumina-capillary inner-surface by pulse high-current discharge. Czechoslovak Journal of Physics 56 [supplem. B] (2006) B564-B570.
[Symposium on Plasma Physics and Technology/22nd./. Praha, 26.6.2006-29.6.2006] [ CZ ] 
[ Anotace ]
 Matějíček J., Kolman B., Dubský J., Neufuss K., Hopkins N., Zwick J.: Alternative methods for determination of composition and porosity in abradable materials. Materials Characterization 57 [2] (2006) 17-29. [ CZ ] 
[ Link ]
 
[ Anotace ]
 Chráska T., Neufuss K., Rohan P., Dubský J., Oberste-Berghaus J.: Bulk nanocrystalline alumina-zirconia materials prepared by plasma spraying. “Thermal Spray 2006: Science, Innovation, and Application,”. Seattle, USA : ASM International, Materials Park, OH, USA, 2006 - (Marple, B.; Moreau, C.) s. 186-187. ISBN 0-87170-809-4.
[International Thermal Spray Conference, ITSC 2006. Seattle (US), 15.05.2006-18.05.2006] [ CZ ] 
[ Anotace ]
2005Dubský J., Materna A., Chráska P., Prask H. J., Gnaupel-Herold T.: Stress gradients in plasma sprayed chromia coatings. Proceedings of the International Thermal Spray Conference 2005 na CD-ROM. Düsseldorf : DVS-Verlag, Düsseldorf, Germany, 2005 - (Lugschneider, E.) s. 1188-1191.
[International Thermal Spray Conference 2005. Basel (CH), 02.05.2005-04.05.2005] [ CZ ] 
[ Anotace ]
 Voleník K., Kolman B., Dubský J., Chráska P.: In-flight behavior of Ni-Al powder during its plasma spraying. Proceedings of International Thermal Spray Conference 2005. Düsseldorf : DVS-Verlag, 2005 - (Lugscheider, E.) s. 1175-1178. ISBN 3-87155-793-5.
[International Thermal Spray Conference 2005. Basel (CH), 02.05.2005-04.05.2005] [ CZ ] 
[ Anotace ]
 Espie G., Denoirjean A., Fauchais P., Clabbe J.C., Dubský J., Schneeweiss O., Voleník K.: In-flight oxidation of iron particles sprayed using gas and water stabilized plasma torch. Surface and Coatings Technology 195 [1] (2005) 17-28. [ CZ ] 
[ Anotace ]
 Chráska T., Neufuss K., Dubský J., Nohava J.: NOVEL CERAMIC MATERIAL WITH AMORPHOUS AND NANOCRYSTALLINE MICROSTRUCTURE. Proceedings. Ljubljana, 2005 - (Čeh, M.; Dražič, G.; Fidler, S.) s. 167-168. ISBN 961-6303-69-4.
[Multinational Congress on Microscopy (7MCM)/7th./. Portorož (SI), 26.06.2005-30.06.2005] [ CZ ] 
[ Anotace ]
 Chráska T., Neufuss K., Rohan P., Dubský J.: Bulk nanocrystalline ceramic material prepared by plasma spraying. NANO´05. Brno, 2005 - (Šandera, P.) s. 201-206. ISBN 80-214-3085-0.
[NANO ’05 - NENAMAT International Conference. Brno (CZ), 08.11.2005-10.11.2005] [ CZ ] 
[ Anotace ]
 Písačka J., Neufuss K., Dubský J., Nohava J., Kolman B.: Plasma spraying behaviour and properties of synthesized/agglomeratedcalcium/magnesium zirconates versus lime/magnesia stabilized zirconia. Proceedings of International Thermal Spray Conference 2005. Düsseldorf : DSV-Verlag, Dusseldorf, 2005 - (Lugscheider, E.) s. 569-574. ISBN 3-87155-793-5.
[International Thermal Spray Conference 2005. Basilej (CH), 02.05.2005-04.05.2005] [ CZ ] 
[ Anotace ]
 Chráska T., Neufuss K., Dubský J., Nohava J., Oberste-Berghaus J.: Plasma spraying of a novel material with amorphous and nanocrystalline microstructure. Thermal Spray connects: Explore its surfacing potential!. Düsseldorf : DVS-Verlag, Düsseldorf, 2005 - (Lugscheider, J.) s. 830-835.
[International Thermal Spray Conference, ITSC 2005. Basel (CH), 2.5.2005-4.5.2005] [ CZ ] 
[ Anotace ]
 Ctibor P., Sedláček J., Neufuss K., Dubský J., Chráska P.: Dielectric properties of plasma sprayed silicates. Ceramics International - [31] (2005) 315-321. [ CZ ] 
[ Anotace ]
2004Rohan P., Neufuss K., Matějíček J., Dubský J., Prchlík L., Holzgartner C.: Thermal and mechanical properties of cordierite, mullite and steatite produced by plasma spraying. Ceramics International 30 [4] (2004) 597-603. [ CZ ] 
[ Link ]
 
[ Anotace ]
 Řídký V., Dubský J., Cejp J.: Tribological Behaviour of Plasma Sprayed Al2O3 and Cr2O3 Coatings. Proceedings of WORKSHOP 2004, CTU Reports. Prague : Czech Technical University in Prague, 2004. s. 514-515. - (CTU Reports.)
[Workshop 2004.. Prague (CZ), 22.03.2004-24.03.2004]
 Voleník K., Ctibor P., Dubský J., Chráska P., Horák J.: Oxidation of nickel during plasma spraying and some properties of nickel oxide. Czechoslovak Journal of Physics 54 [suppl.C] (2004) C889-C896.
[Symposium on Plasma Physics and Technology /21./. Praha, 14.06.2004-17.06.2004] [ CZ ] 
[ Anotace ]
 Chráska T., Neufuss K., Nohava J., Dubský J.: Plasma Spraying of Alumina and Zirconia Nanoceramics. Proceedings. Brno, 2004 - (Šandera, P.) s. 85-90. ISBN 80-214-2793-0.
[Nano ’04 International Conference. Brno (CZ), 13.10.2004-15.10.2004] [ CZ ] 
[ Anotace ]
 Dubský J., Řídký V., Chráska P., Kolman B.: Properties of plasma sprayed alumina-chromia mixtures. International Thermal Spray Conference & Exposition, ITSC 2004. Dusseldorf : DVS-Dusseldorf, Germany, 2004. 030.pdf. ISBN 3-87155-792-7.
[International Thermal Spray Conference 2004, Thermal Spray Solutions, Advances in Technology and Applications. Osaka (JP), 10.05.2004-12.05.2004] [ CZ ] 
[ Anotace ]
2003Dubský J., Chráska P., Ahmaniemi S., Vippola M., Vuoristo P., Mäntylä T.: Effect of Aluminum Phosphate Sealing on the Elastic Properties of Plasma Sprayed Ceramic Coatings. Proceedings of the 2003 International Thermal Spray Conference. Ohio : ASM International Materials Park, 2003 - (Marple, B.; Moreau, C.) s. 617-622.
[Thermal Spray 2003 Advancing the Science and Applying the Technology.. Orlando, Florida (US), 05.05.2003-08.05.2003]
 Neufuss K., Dubský J., Rohan P., Kolman B., Chráska P., Berger L.M., Zieris R., Thiele S., Nebelung M.: Structure and Properties of CaZrO2 Coatings Prepared by WSP and APS Spraying. Proceedings of the 2003 International Thermal Spray Conference. Ohio : ASM Interantional Materials Park, 2003 - (Marple, B.; Moreau, C.) s. 1541-1546. ISBN 0-87170-785-3. - (2).
[Thermal Spray 2003 Advancing the Science and Applying the Technology.. Orlando, Florida (US), 05.05.2003-08.05.2003]
 Voleník K., Chráska P., Dubský J., Had J., Leitner J., Schneeweiss O.: Oxidation of Ni-Based Alloys Sprayed by a Water-Stabilized Plasma Gun(WSP). Proceedings of the 2003 International Thermal Spray Conference. Ohio : ASM International Materials Park, 2003 - (Marple, B.; Moreau, C.) s. 1033-1040. ISBN 0-87170-785-3. - (2).
[Thermal Spray 2003 Advancing the Science and Applying the Technology.. Orlando, Florida (US), 05.05.2003-08.05.2003]
 Kolman B., Neufuss K., Jančárek A., Dubský J., Chráska P.: Plasma Sprayed Zircon Deposits Modified by Laser Treatment. Acta Universitatis Scientarium Socialium et Artis Educandi Tallinnensis, Proceedings of the Tallinn University of Social and Educational Sciences, B2, Reali, Dense Plasma Interaction with Materials. Tallinn, 2003 - (Ugaste, U.) s. 69-78. ISBN 9985-58-276-4. ISSN 1736-0633.
[Dense Plasma Interaction with Materials.. Tallinn (EE), 09.10.2003-11.10.2003]
2002Ctibor P., Neufuss K., Dubský J., Bačová V., Jankura D., Kniewald D., Jakubov M., Draganovská D.: Ceramic coatings for thermal cycling. Povrchové inžinierstvo 2002 (Zborník 1.vedeckej konferencie). Košice : Technická univerzita Košice, 2002 - (Jakubov, M.) s. 33-42. ISBN 80-7099-864-4.
[Povrchové inžinierstvo 2002.. Košice (SK), 01.10.2002]
 Dubský J., Matějíček J., Prask H. J., Gnäupel-Herold T.: Residual and applied stresses in plasma Cr2O3 coatings. Materials Science Forum, Vol. 404-407, 2002, 419-424 ISBN 0-87849-900-8.
[European Conference on Residual Stresses/6th./. Coimbra (PT), 10.07.2002-12.07.2002]
[ Link ]
 
 Dubský J., Matějíček J.: Residual and applied stresses in thermally sprayed metallic and ceramic coatings. Proceedings of the International Thermal Spray Conference. Düsseldorf : DVS, 2002 - (Lugscheider, E.; Berndt, C.) s. 606-609. ISBN 3-87155-783-8.
[International Thermal Spray Conference.. Essen (DE), 04.03.2002-06.03.2002]
 Dubský J., Matějíček J.: Stresses and Young's moduli in thermally sprayed coatings. International Thermal Spray Conference Proceedings. Düsseldorf : DVS, 2002 - (Lugscheider, E.; Berndt, C.) s. 606-609. ISBN 3-87155-783-8.
[International Thermal Spray Conference.. Essen (DE), 04.03.2002-06.03.2002]
 Dubský J., Prask H. J., Matějíček J., Gnäupel-Herold T.: Stresses in plasma-sprayed Cr2O3 coatings measured by neutron diffraction. Applied Physics A - Materials Science & Processing 75 [-] (2002) 1-3.
[International Conference on Neutron Scattreing.. Munich, 09.08.2001-13.08.2002]
 Ctibor P., Sedláček J., Neufuss K., Dubský J., Chráska P.: Study of dielectric properties of plasma sprayed silicates at low voltage. Proceedings of International Thermal Spray Conference 2002. ASM International, 2002 - (Berndt, C.) s. 617-621. ISBN 3-87155-783-8.
[International Thermal Spray Conference.. Essen (DE), 04.03.2002-06.03.2002]
 Bačová V., Kniewald D., Jankura D., Draganovská D., Ctibor P., Neufuss K., Dubský J.: Titanátové povlaky v nadvädznosti na analýzu predúprav povrchu základu. Povrchové inžinierstvo 2002 (Sborník 1.vedeckej konferencie). Košice : Technická univerzita Košice, 2002 - (Jakubov, M.) s. 19-28. ISBN 80-7099-864-4.
[Povrchové inžinierstvo 2002.. Košice (SK), 01.10.2002] [ CZ ] 
[ Anotace ]
 Matějíček J., Neufuss K., Ctibor P., Rohan P., Dubský J., Chráska P., Brožek V.: WSP-Sprayed Boron Carbide Coatings for Fusion Applications. Proceedings of International Thermal Spray Conference 2002. Düsseldorf : DVS, 2002 - (Lugscheider, E.; Berndt, C.) s. 1-5. ISBN 3-87155-783-8.
[International Thermal Spray Conference.. Essen (DE), 04.03.2002-06.03.2002]
2001Chráska P., Kolman B., Dubský J., Ctibor P., Neufuss K.: Spatial distribution of chemistry, structural features and phases in tehrmal spray deposits. Acta Technica CSAV 46 [-] (2001) 323-336.
 Schneeweiss O., Dubský J., Voleník K., Had J., Leitner J., Seberíni M.: Spinel oxides growing on Fe=Cr alloy particles during plasma spraying. Czechoslovak Journal of Physics 51 [7] (2001) 711-717.
[Mössbauer Spectroscopy in Materials Science. Velké Karlovice, 03.09.2000-08.09.2000]
 Neufuss K., Ilavský J., Kolman B., Dubský J., Rohan P., Chráska P.: Variation of plasma spray deposits microstructure and properties formed by particles passing through different areas of plasma jet. Ceramics - Silikáty 45 [1] (2001) 1-8. [ CZ ] 
[ Anotace ]
2000Vrána M., Mikula P., Lukáš P., Dubský J., Wagner V.: New Developments in Instrumentation for Strain Scanning in NPI Řež. Materials Science Forum 321/324 (2000) 338-344.
 Ctibor P., Rohan P., Kolman B., Dubský J., Chráska P.: Plasma Spraying as a Technique for Dielectric Ceramics Preparation. Proceedings of the 9th International Metallurgical Conference "METAL 2000". Ostrava : Tanger,s.r.o., 2000. s. soubor 514.
[International Metallurgical Conference "METAL 2000"/9th./. Ostrava (CZ), 16.05.2000-18.05.2000]
 Leitner J., Dubský J., Had J., Hanousek F., Kolman B., Voleník K.: Metastable chromium-rich oxide formed during plasma spraing of high-alloy steel. Oxidation of Metals 54 [5-6] (2000) 549-558.
1999Neufuss K., Dubský J., Kolman B., Chráska P., Brožek V., Boháč P.: APS Spraying of MgO and CeO2 with WSP. Proceedings of the 14th International Symposium on Plasma Chemistry. Prague : Institute of Plasma Physics, 1999 - (Hrabovský, M.; Konrád, M.; Kopecký, V.) s. 2075-2079. ISBN 80-902724-4-4. - (4).
[International Symposium on Plasma Chemistry/14th./. Prague (CZ), 02.08.1999-06.08.1999]
 Neufuss K., Ilavský J., Dubský J., Kolman B., Chráska P.: Plasma Spraying of Silikates 2. Conference Proceedings: United Thermal Spray Conference UTSC '99. Düsseldorf : DSV Verlag, Düsseldorf, 1999 - (Lugscheider, E.; Kammer, P.) s. 636-640. ISBN 3-87155-653-x.
[United Thermal Spray Conference /2./. Düsseldorf (DE), 17.03.1999-19.03.1999]
 Kroupa F., Dubský J.: Pressure Dependency of Young's Moduli of Thermal Sprayed Materials. Scripta Materialia 40 [-] (1999) 1249-1254.
 Dubský J., Kolman B., Vyšohlíd M.: Residual stresses and yuong-modulus of alumina and chromia plasma sprayed deposits. Conference Proceedings:United Thermal Spray Conference UTSC 99. Düsseldorf : Verlag für Schweiáen und Verwande Veflahren, D.V.SVerlag, 1999 - (Lugscheider, E.; Kammer, P.) s. 659-663. ISBN 3-87155-653-x.
[UTSC '99 United Thermal Spray Conference. Düsseldorf (DE), 17.03.1999-19.03.1999]
 Dubský J., Kolman B., Ctibor P., Kroupa F., Ilavský J.: Structure and residual stresses in thermally sprayed steel coatings. 0-87849-833-8. In: Functionally graded materials 1998. Zuerich : ttp Trans Tech Publications ltd, 1999 - (Kaysser, W.) s. 232-237. - (Materials Science Forum.. vol.308-311(1999)).
[International Symposium on Functionally Graded Materials /5./. Dresden (DE), 26.10.1998-29.10.1998]
 Kolman B., Neufuss K., Ilavský J., Dubský J., Chráska P.: Chemical Inhomogeneity of Silicates Treated by Plasma Spraying. Journal of Analytical Atomic Spectrometry 14 [3] (1999) 471-473.
[ICXOM-15th International Congress on X-ray Optics and Microanalysis. Antwerp, 24.08.1998-27.08.1998]
 Kantor P., Siegl J., Neufuss K., Dubský J.: Unavové zkoušky těles s různými typy nástřiků. Metal 99 - 8. mezinárodní metalurgický veletrh a symposium. Ostrava : TANGER, s.r.o., Ostrava, 1999. s. 250-256. ISBN 80-85988-37-2.
[METAL 99 - mezinárodní metalurgický veletrh a symposium /8./. Ostrava (CZ), 11.05.1999-13.05.1999]
 Neufuss K., Kolman B., Chráska P., Dubský J.: Vysokoteplotní chování soustavy plazmově deponovaný cordierit/molybden. Metal 99 - 8.mezinárodní metalurgický veletrh a symposium. Ostrava : TANGER, s.r.o. Ostrava, 1999. s. 160-161. ISBN 80-85988-35-6.
[Metal 99 - 8.mezinárodní metalurgický veletrh a symposium. Ostrava (CZ), 11.05.1999-13.05.1999]
1998Matějíček J., Sampath S., Dubský J.: X-ray Residual Stress Measurements in Metallic and Ceramic Plasma Sprayed Coatings. Journal of Thermal Spray Technology 7 [4] (1998) 489-496.
 Dubský J., Kolman B., Neufuss K.: Phase Composition Changes in Annealed Plasma-Sprayed Zircon-Alumina Coatings. Thermal Spray:A United Forum for Scientific and Technological Advances. Materials Park, OH : ASM International, 1998 - (Berndt, C.) s. 473-476. ISBN 0-87170-618-0.
[United Thermal Spray Conference/1./. Indianapolis (US), 15.09.1997-18.09.1997]
 Dubský J., Kolman B., Buchal A.: Phase Composition changes in plasma sprayed zircon-alumina Tubes. Thermal Spray, Meeting the Challanges of the 21st Century. Materials Park, OH : ASM International, 1998 - (Coddet, C.) s. 1613-1616. ISBN 0-87170-659-8.
[International Thermal Spray Conference /15./. Nice (FR), 25.05.1998-29.05.1998]
 Chráska P., Neufuss K., Kolman B., Dubský J.: Plasma Spraying of Silicates. Thermal Spray:A United Forum for Scientific and Technological Advances. Materials Park, OH : ASM International, 1998 - (Berndt, C.) s. 477-481. ISBN 0-87170-618-0.
[United Thermal Spray Conference /1./. Indianapolis (US), 15.09.1997-18.09.1997]
 Voleník K., Dubský J., Chráska P., Neufuss K., Novák V.: Compressive behaviours of Plasma Sprayed High-Alloy Steel. Thermal Spray, Meeting the Challenges of the 21st Century. Materials Park, OH : ASM International, 1998 - (Coddet, C.) s. 671-675. ISBN 0-87170-659-8.
[International Thermal Spray Conference /15./. Nice (FR), 25.05.1998-29.05.1998]
 Dubský J., Kolman B., Ctibor P., Kroupa F.: Pnutí v ocelových nastřicích. Acta Mechanica Slovaka 2 [-] (1998) 183-188.
 Chráska P., Brožek V., Kolman B., Ilavský J., Neufuss K., Dubský J., Voleník K.: Porosity Control of Thermally Sprayed Ceramic Deposits. 15th International Thermal Spray Conference. Materials Park, OH : ASM International, 1998 - (Coddet, C.) s. 1299-1304. ISBN 0-87170-659-8.
[International Thermal Spray Conference /15./. Nice (FR), 25.05.1998-29.05.1998]
 Matějíček J., Sampath S., Dubský J.: Residual Stress Measurement in Plasma Sprayed Coatings by x-Ray Diffraction. Thermal Spray: A United Forum for Scientific and Technological Advances. Materials Park, OH : ASM International, 1998 - (Berndt, C.) s. 855-860. ISBN 0-87170-618-0.
[United Thermal Spray Conference /1./. Indianapolis (US), 15.09.1997-18.09.1997]
1997Ilavský J., Berndt C. C., Herman H., Chráska P., Dubský J.: Alumina-Base Plasma Sprayed Materials, Part II:Phase Transformations in Aluminas. Journal of Thermal Spray Technology 6 [4] (1997) 439-444.
 Chráska P., Dubský J., Neufuss K., Písačka J.: Alumina-Base Plasma -Sprayed Materials, Part I: Phase Stability of Alumina andAlumina-Chromia. Journal of Thermal Spray Technology 6 [3] (1997) 320-326.
 Voleník K., Leitner J., Hanousek F., Dubský J., Kolman B.: Oxides in plasma-sprayed chromium steel. Journal of Thermal Spray Technology 6 [3] (1997) 327-334.
 Neufuss K., Kolman B., Chráska P., Dubský J.: Plasma Spraying of Silicates. Indianapolis, 1997.
[United Thermal Spray Conference. Indianapolis (US), 15.09.1997-18.09.1997]
 Voleník K., Novák V., Dubský J., Chráska P., Neufuss K.: Properties of alloy steel coatings oxidized during plasma spraying. Materials Science and Engineering A-Structural materials 234-236 [-] (1997) 493-496.
[International Conference on the Strength of Materials /11./. Prague, 25.08.1997-29.08.1997]
 Brožek V., Dufek V., Dubský J., Chráska P.: Free Standing Ceramometallic Parts Prepared by Water Stabilized Plasma Treatment. Munich, 1997.
[European Conference on Advances in Structural PM Component Production. Munich (DE), 15.10.1997-17.10.1997]
1996Voleník K., Dubský J., Hanousek F.: Fázové složení oxidů vznikajících při plazmovém stříkání chromové ocele. Materials Structure in Chemistry, Biology, Physics and Technology 3 [2] (1996) 183-184.
[Metody studia struktury látek. Aplikace v chemii, biologii, fyzice a technologii. Staré Hamry, 24.06.1996-28.06.1996]
 Dubský J., Chráska P., Kolman B., Neufuss K.: Image Analysis of Pores in Plasma Sprayed Deposits. EMAS' 96. Debrecen : Kossuth Lajos University, Department of Solid State Physics, 1996 - (Lábár, J.; Heikinheimo, E.; Nicholson, P.)
[EMAS`96. Regional Workshop on Electron Probe Microanalysis of Materials Today-Practical Aspects /2./. Balatonfured (HU), 19.05.1996-22.05.1996]
 Šimek M., Šalanský J., Dubský J., Kolman B.: Synthesis of fullerene-like structures under DC gliding arc discharge conditions. Proceedings. Bratislava : European Physical Society, 1996 - (Lukáč, P.; Košinár, I.; Skalný, J.) - (20E. B).
[ESCAMPIG 96. Poprad (SK), 27.08.1996-30.08.1996]
1995Chráska P., Dubský J.: Alumina Based Plasma Sprayed Materials. Proceeding of 14th International Thermal Spray Conference. Osaka : High Temperature Society of Japan, 1995 - (Ohmori, A.) ISSN 1241-3074.
[International Thermal Spray Conference /14./. Kobe (JP), 22.05.1995-26.05.1995]
 Dubský J., Kolman B.: Correlation between spraying parameters and some properties of plasma sprayed alumina coatings. International Conference on Advanced Materials and Technologies. Plzeň : Škoda, 1995.
[International Conference on Advanced Materials and Technologies. Plzeň (CZ), 13.06.1995-16.06.1995]
 Dubský J., Kolman B., Chráska P.: Effect of Spraying Parameters on Phase Composition of Deposits Prepared by the WSP Process. 8th National Thermal Spray Conference. Ohio, Materials Park : ASM International, 1995 - (Berndt, C.; Sampath, S.) - (0-87170-541-9).
[National Thermal Spray Conference /8./. Houston (US), 11.09.1995-15.09.1995]
 Ganev N., Kraus I., Gosmanová G., Dubský J., Pfeiffer L.: Stresses in plasma sprayed free-standing ceramics parts. International Conference on Advanced Materials and Technologies. Plzeň : Škoda, 1995.
[International Conference on Advanced Materials and Technologies. Plzeň (CZ), 13.06.1995-16.06.1995]
 Brožek V., Dubský J., Mastný L., Šrank Z.: Interkalace nitridu boritého. Zborník príspevkov. Bratislava, 1995.
[Zjazd chemických spoločností /49./. Bratislava (SK), 04.09.1995-07.09.1995]
1994Dubský J., Kolman B., Forman J.: Vysokoteplotní stabilita plazmově nanesených povlaků na bázi AL2O3. 1. národní konference o plazmových a žárových nástřicích. Brno : CONMET, 1994 - (Musil, J.; Kubíček, J.; Korčák, S.) s. 150-153.
[Národní konference o plazmových a žárových nástřicích /1./. Brno (CZ), 19.04.1994-21.04.1994]
 Kolman B., Forman J., Dubský J., Chráska P.: Oxides in Plasma Sprayed Metallic Coatings. Procedings EMAS '94 - 1st Regional Workshop on Electron Probe Microanalysis of Materials Today - Practical Aspects. Kirkkonummi : Helsinki University of Technology, 1994 - (Heikinheimo, E.; Broomberg, J.) s. 3. - (951-22-2170-5).
[EMAS '94 Regional Workshop Electron Probe Microanalysis of Materials Today- Practical Aspects /1./. Kirkkonummi (FI), 15.06.1994-17.06.1994]
 Brožek V., Dubský J., Kolman B., Neufuss K., Chráska P.: Plasma Sprayed Coatings of Molybdenum Silicide. Proceedings of 8th International Conference of High Temperature Materials Chemistry. Vienna : University Wien, 1994. s. 99.
[HTMC - International Conference of High Temperature Materials Chemistry /8./. Vienna (AT), 04.04.1994-09.04.1994]
 Dubský J., Kolman B., Chráska P.: Stability of alpha phase alumina-chromia plasma sprayed deposits after annealing. Thermal Spray Industrial Applications. Boston : ASM International, 1994 - (Berndt, C.; Sampath, S.) s. 779-782. - (0-87170-509-5).
[National Thermal Spray Conference /7./. Boston (US), 20.06.1994-24.06.1994]
 Kolman B., Forman J., Dubský J., Chráska P.: Homogeneity studies of powders and plasma sprayed deposits. Microchimica Acta 114/115 [-] (1994) 335-342.
1993Dubský J., Kolman B., Chráska P.: Comparison of Alumina-Titania Powders Prepared by Various Technologies. Ohio : ASM International, 1993. ISBN 0-87170-470-6.
[5th National Thermal Spray Conference. Anaheim, California (US), 07.06.1993-11.06.1993]
 Ilavský J., Berndt C. C., Herman H., Forman J., Dubský J., Chráska P., Neufuss K.: Free-standing ceramics manufactured by plasma spraing. Ohio, US : ASM International, 1993. ISBN 0-87170-470-6.
[5th National Thermal Spray Conference. Anaheim, California (US), 07.06.1993-11.06.1993]
 Kolman B., Forman J., Dubský J., Chráska P.: Homogeneity Studies of Powders and Plasma Sprayed Deposits. Rimini, IT : autor neuvedl, 1993.
[3rd European workshop on modern developments and applications in microbeam analysis. Rimini (IT), 09.05.1993-13.05.1993]
 Kolman B., Forman J., Dubský J., Chráska P.: Chemical homegeneity of plasma sprayed materials. Ohio, US : ASM International, 1993. ISBN 0-87170-470-6.
[5th National Thermal Spray Conference. Anaheim, California (US), 07.06.1993-11.06.1993]
 Kolman B., Dubský J., Chráska P.: Kompositní směsi Al2O3+TiO2 připravované rozprašovací technikou. Pardubice : VŠCHT Pardubice, 1993.
[Metody přípravy a charakterizace práškových materiálu. Pardubice (CR), 06.09.1993-07.O9.1993]
 Ilavský J., Forman J., Dubský J., Chráska P., Neufuss K., Berndt C. C., Herman H.: Porosity studies of ceramic coatings prepared with water stabilized plasma. Materials Park : ASM International, 1993. ISBN 0-87170-470-6.
[National Thermal Spray Conference /5./. Anahaim (US), 07.06.1993-11.06.1993]
 Dubský J., Kolman B., Brožek V.: Příprava impregnovaných prášku pro plazmové depozice. Pardubice : VŠCHT Pardubice, 1993.
[Metody přípravy a charakterizace práškových materiálu. Pardubice (CR), 06.09.1993-07.09.1993]
 Dubský J., Kolman B., Brožek V.: Příprava kovových a keramických prášku plazmovými technologiemi. Sborník přednášek 4. Česko-Slovenská konference "Metody přípravy a charakterizace práškových materiálů.". Pardubice : VŠCHT Pardubice, 1993.
[Metody přípravy a charakterizace práškových materiálu. Pardubice (CR), 06.09.1993-07.09.1993]
 Brožek V., Dubský J., Kolman B.: Reaktivní plazmové depozice titanových cermetů. Chemické listy 87 [9] (1993) 76.
 Dubský J., Brožek V., Chráska P.: The Chemical Inhomogeneity of Al2O3-Cr2O3 Powders for Plasma Spraying. Praha : Czech Technical University, 1993.
[16th symposium on plasma physics and technology. Praha (CR), 27.04.1993-29.04.1993]